Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LPC1519JBD64 - NXP

Description: ARM® Cortex®-M3 LPC15xx Microcontroller IC 32-Bit Single-Core 72MHz 256KB (256K x 8) FLASH 64-LQFP (10x10)

Download LPC1519JBD64 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LPC1519JBD64 - NXP - PCB symbol
click to zoom
PCB Footprints
LPC1519JBD64 - NXP PCB footprint - Quad Flat Packages - Quad Flat Packages - LQFP64 -T
click to zoom
3D Models
LPC1519JBD64 - NXP - 3D model - Quad Flat Packages - LQFP64 -T
click to zoom

LPC1519JBD64 Details

  • Manufacturer Part Number:

    LPC1519JBD64

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    LQFP64

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    3A991.A.2

  • HTS Code:

    8542.31.00.25

  • Manufacturer:

    NXP Semiconductors

  • YTEOL:

    5

  • Has ADC:

    YES

  • Bit Size:

    32

  • Boundary Scan:

    YES

  • Clock Frequency-Max:

    25 MHz

  • DAC Channels:

    YES

  • DMA Channels:

    YES

  • JESD-30 Code:

    S-PQFP-G64

  • JESD-609 Code:

    e3

  • Length:

    10 mm

  • Moisture Sensitivity Level:

    3

  • Number of I/O Lines:

    46

  • Number of Terminals:

    64

  • On Chip Program ROM Width:

    8

  • Operating Temperature-Max:

    105 °C

  • Operating Temperature-Min:

    -40 °C

  • PWM Channels:

    YES

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LFQFP

  • Package Shape:

    SQUARE

  • Package Style:

    FLATPACK, LOW PROFILE, FINE PITCH

  • Peak Reflow Temperature (Cel):

    260

  • RAM (bytes):

    36864

  • ROM (words):

    262144

  • ROM Programmability:

    FLASH

  • Seated Height-Max:

    1.6 mm

  • Speed:

    72 MHz

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3.3 V

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    TIN

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    10 mm

  • uPs/uCs/Peripheral ICs Type:

    MICROCONTROLLER, RISC

LPC1519JBD64 Frequently Asked Questions (FAQs)

  • The maximum operating temperature range for the LPC1519JBD64 is -40°C to +105°C, as specified in the datasheet. However, it's recommended to operate the device within the industrial temperature range of -40°C to +85°C for optimal performance and reliability.
  • The internal oscillator of the LPC1519JBD64 can be configured using the SYSCON registers. Specifically, the IRC (Internal RC Oscillator) can be enabled and configured using the SYSCTL_IRC_CTRL register. The IRC frequency can be set to 12 MHz, 18 MHz, or 24 MHz using the SYSCTL_IRC_FREQ_SEL register.
  • The maximum current consumption of the LPC1519JBD64 depends on the operating frequency, voltage, and peripherals used. According to the datasheet, the maximum current consumption is approximately 130 mA at 48 MHz, 3.3 V, and with all peripherals enabled. However, this value can be reduced by optimizing the power consumption using techniques such as clock gating, power-down modes, and peripheral disablement.
  • The ADC on the LPC1519JBD64 is a 12-bit successive approximation register (SAR) ADC. To use the ADC, you need to configure the ADC clock, select the ADC channel, and enable the ADC using the ADC_CTRL register. You can then start a conversion using the ADC_START register and read the conversion result from the ADC_RESULT register.
  • Yes, the LPC1519JBD64 can be used with an external crystal oscillator. The device has an external clock input (EXTCLK) that can be connected to a crystal oscillator or an external clock source. The external clock frequency can be set using the SYSCTL_EXTCLK_CTRL register.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LPC1519JBD64 Overview

Use the download button to access the LPC1519JBD64 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LPC15, or try a keyword search, such as Microcontrollers

About NXP

NXP Semiconductors is a leading manufacturer of semiconductor devices with a wide range of semiconductor solutions, including microcontrollers, sensors, connectivity solutions, power management ICs, and security solutions. These products are used in a variety of applications such as automotive, industrial automation, smart homes, mobile devices, and more. NXP Semiconductors is one of the world’s largest semiconductor companies and is headquartered in Eindhoven, the Netherlands.

Parts related to LPC1519JBD64

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

LPC1519JBD64 Alternates

Showing results

Image Part Number Model
Part Image LPC1519JBD64E NXP Semiconductors

RISC Microcontroller, 32-Bit, FLASH, CORTEX-M3 CPU, 72MHz, CMOS, PQFP64