The recommended power-up sequence is to apply power to the VCC pin first, followed by the VDD pin. This ensures proper initialization of the internal voltage regulators.
The I2C interface on the LPC_165_CTP is configured through the I2C registers. Set the I2C clock frequency, slave address, and enable the I2C interface by writing to the I2C control register.
The maximum clock frequency supported by the LPC_165_CTP is 100 MHz. However, the recommended operating frequency is 72 MHz to ensure optimal performance and power consumption.
The LPC_165_CTP has a built-in watchdog timer that can be enabled and configured through the watchdog timer control register. Set the watchdog timer period and enable the timer by writing to the control register.
The boot mode pins (BOOT0 and BOOT1) on the LPC_165_CTP determine the boot mode of the device. They can be used to select between different boot modes, such as booting from internal flash, external flash, or UART.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
LPC_165_CTP Overview
Use the download button to access the LPC_165_CTP 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like LPC_1,
or try a keyword search, such as Optoelectronic Accessories
