The recommended power-on sequence is to apply power to the VCC and VCCIO pins simultaneously, followed by the reset signal (nRST) after a minimum of 10ms.
The clock settings can be configured through the Clock Control Unit (CCU) registers. The CCU provides a flexible clock generation and distribution system, allowing the user to select from various clock sources and configure the clock frequencies.
The maximum operating frequency of the LPC_167_CTP is 100 MHz, but it can be overclocked to 120 MHz with careful consideration of power consumption and thermal management.
The LPC_167_CTP has a built-in watchdog timer (WDT) that can be enabled and configured through the WDT registers. The WDT can be used to reset the system in case of a software or hardware failure.
The boot mode pins (BOOT0 and BOOT1) determine the boot mode of the device. They can be used to select between different boot modes, such as booting from internal flash, external flash, or serial boot loader.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
LPC_167_CTP Overview
Use the download button to access the LPC_167_CTP 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like LPC_1,
or try a keyword search, such as Optoelectronic Accessories
