The recommended PCB footprint for the LPS0800H1000JB is a pad size of 8.5mm x 8.5mm with a 1.5mm hole in the center for the inductor's lead.
The LPS0800H1000JB has a maximum operating temperature of 125°C. Ensure good airflow around the inductor and avoid mounting it near heat sources. Use thermal vias or thermal pads to dissipate heat if necessary.
The LPS0800H1000JB has a saturation current rating of 10A. Exceeding this current may cause the inductor to saturate, reducing its inductance and increasing its core losses.
Yes, the LPS0800H1000JB is suitable for high-frequency applications up to 1 MHz. However, be aware that the inductor's impedance and losses may increase at higher frequencies.
Follow Vishay's recommended storage and handling procedures, and ensure the inductor is soldered correctly to prevent thermal and mechanical stress. Use a conformal coating to protect the inductor from environmental factors if necessary.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
LPS0800H1000JB Overview
Use the download button to access the LPS0800H1000JB 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like LPS08,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
