LT1210CR#PBF footprint, schematic symbol and 3D model by Analog Devices

Symbol

click to zoom

PCB Footprints

LT1210CR#PBF - Analog Devices PCB footprint - Other - Other - LT1210CR#PBF

click to zoom

3D Models

LT1210CR#PBF - Analog Devices - 3D model - Other - LT1210CR#PBF

click to zoom

Datasheet Download Datasheet
Stock & Prices Price & Stock for LT1210CR#PBF
Part Number LT1210CR#PBF
Manufacturer Analog Devices
Pin Count 8
Part Category Integrated Circuit
Package Category Other
Footprint Name Other - LT1210CR#PBF
Released Date Jun 15, 2018
Last Modified Date Aug 9, 2023 1:04 PM UTC
Pinout / Pin List Click Here (Member Only)

LT1210CR#PBF Details

Manufacturer Part Number:
LT1210CR#PBF
Brand Name:
Analog Devices Inc
Pbfree Code:
No
Rohs Code:
Yes
Part Life Cycle Code:
Active
Package Description:
D2PAK-7
Pin Count:
7
Manufacturer Package Code:
05-08-1462
Country Of Origin:
Malaysia
ECCN Code:
EAR99
HTS Code:
8542.33.00.01
Manufacturer:
Analog Devices Inc
YTEOL:
9
Amplifier Type:
OPERATIONAL AMPLIFIER
Architecture:
CURRENT-FEEDBACK
Common-mode Reject Ratio-Min:
50 dB
Common-mode Reject Ratio-Nom:
60 dB
Frequency Compensation:
NO
Input Offset Voltage-Max:
20000 µV
JESD-30 Code:
R-PSSO-G7
JESD-609 Code:
e3
Length:
10.22 mm
Low-Bias:
NO
Low-Offset:
NO
Micropower:
NO
Moisture Sensitivity Level:
1
Neg Supply Voltage Limit-Max:
-18 V
Neg Supply Voltage-Nom (Vsup):
-5 V
Number of Functions:
1
Number of Terminals:
7
Operating Temperature-Max:
70 °C
Package Body Material:
PLASTIC/EPOXY
Package Code:
TO-263
Package Equivalence Code:
SMSIP7H,.55,50TB
Package Shape:
RECTANGULAR
Package Style:
SMALL OUTLINE
Peak Reflow Temperature (Cel):
260
Power:
NO
Programmable Power:
NO
Qualification Status:
Not Qualified
Seated Height-Max:
4.877 mm
Slew Rate-Min:
400 V/us
Slew Rate-Nom:
900 V/us
Supply Current-Max:
65 mA
Supply Voltage Limit-Max:
18 V
Supply Voltage-Nom (Vsup):
5 V
Surface Mount:
YES
Technology:
BIPOLAR
Temperature Grade:
COMMERCIAL
Terminal Finish:
Matte Tin (Sn)
Terminal Form:
GULL WING
Terminal Pitch:
1.27 mm
Terminal Position:
SINGLE
Time@Peak Reflow Temperature-Max (s):
30
Unity Gain BW-Nom:
35000
Voltage Gain-Min:
562.34
Wideband:
YES
Width:
8.89 mm

LT1210CR#PBF Frequently Asked Questions (FAQs)

A good PCB layout for the LT1210 involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing the input and output capacitors close to the device. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
To ensure stability in high-gain configurations, it's essential to use a compensation capacitor (Cc) between pins 5 and 6. The value of Cc depends on the gain and bandwidth requirements. A good starting point is to use a 10pF to 22pF capacitor. Additionally, ensure that the input and output impedances are matched, and the layout is optimized for minimal parasitic inductance and capacitance.
The maximum power dissipation of the LT1210 is dependent on the package type and the ambient temperature. For the CR package, the maximum power dissipation is approximately 1.4W. To calculate the power dissipation, use the formula: Pd = (Vin - Vout) x Iout, where Vin is the input voltage, Vout is the output voltage, and Iout is the output current.
Yes, the LT1210 can be used as a unity-gain buffer. However, it's essential to ensure that the input impedance is matched to the source impedance to prevent signal attenuation. Additionally, the output impedance should be low enough to drive the load. A unity-gain buffer configuration may also require additional compensation capacitors to ensure stability.
To protect the LT1210 from overvoltage and overcurrent conditions, use voltage regulators or transient voltage suppressors (TVS) on the input and output lines. Additionally, consider using current-limiting resistors or fuses to prevent excessive current draw. It's also essential to follow proper PCB layout practices to minimize the risk of electrical overstress.

Trust Checks

Expert Contribution

System Verified

Community Approved

LT1210CR#PBF Overview

Use the download button to access the LT1210CR#PBF schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like LT121, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LT1210CR#PBF

Showing 0 results

Image	Part Number	Model
	LT1210CR#PBF Linear Technology Operational Amplifier, 1 Func, 20000uV Offset-Max, BIPolar, PSSO7
	LT1210CR#TRPBF Linear Technology Operational Amplifier, 1 Func, 20000uV Offset-Max, BIPolar, PSSO7
	LT1210CR#TR Linear Technology Operational Amplifier, 1 Func, 20000uV Offset-Max, BIPolar, PSSO7
	LT1210CR Linear Technology Operational Amplifier, 1 Func, 20000uV Offset-Max, BIPolar, PSSO7
	LT1210CR Analog Devices Inc Operational Amplifier, 1 Func, 20000uV Offset-Max, BIPolar, PSSO7
For a full list of alternate parts for LT1210CR#PBF, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →

LT1210CR#PBF - Analog Devices

LT1210CR#PBF Details

LT1210CR#PBF Frequently Asked Questions (FAQs)

Trust Checks

LT1210CR#PBF Overview

About Analog Devices

Parts related to LT1210CR#PBF

LT1210CR#PBF Alternates