Part Image

LT1215ACN8#PBF - Analog Devices

Description: Standard (General Purpose) Amplifier 2 Circuit 8-PDIP

Download LT1215ACN8#PBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
LT1215ACN8#PBF - Analog Devices PCB footprint - Dual-In-Line Packages - Dual-In-Line Packages - N8 Package 8-Lead PDIP (Narrow .300 Inch)
click to zoom
3D Models
LT1215ACN8#PBF - Analog Devices  - 3D model - Dual-In-Line Packages - N8 Package 8-Lead PDIP (Narrow .300 Inch)
click to zoom

LT1215ACN8#PBF Details

  • Manufacturer Part Number:

    LT1215ACN8#PBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    0.300 INCH, PLASTIC, DIP-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    05-08-1510 (N8)

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.53 µA

  • Bias Current-Max (IIB) @25C:

    0.5 µA

  • Common-mode Reject Ratio-Min:

    90 dB

  • Common-mode Reject Ratio-Nom:

    108 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    550 µV

  • JESD-30 Code:

    R-PDIP-T8

  • JESD-609 Code:

    e3

  • Length:

    9.27 mm

  • Low-Bias:

    NO

  • Low-Offset:

    YES

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -18 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Functions:

    2

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    DIP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    IN-LINE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    3.937 mm

  • Slew Rate-Min:

    40 V/us

  • Slew Rate-Nom:

    50 V/us

  • Supply Current-Max:

    8 mA

  • Supply Voltage Limit-Max:

    18 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    NO

  • Technology:

    BIPOLAR

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    THROUGH-HOLE

  • Terminal Pitch:

    2.54 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    23000

  • Voltage Gain-Min:

    1000000

  • Wideband:

    YES

  • Width:

    7.62 mm

LT1215ACN8#PBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LT1215 involves keeping the input and output traces short and separate, using a solid ground plane, and placing the input and output capacitors close to the device. A 4-layer PCB with a dedicated power plane and a dedicated ground plane is recommended.
  • To ensure stability, make sure to follow the recommended component values and PCB layout guidelines. Also, ensure that the output capacitor has a low ESR and is properly sized for the output current. Additionally, consider adding a small capacitor (e.g., 10nF) between the VCC pin and ground to filter out high-frequency noise.
  • The maximum output current of the LT1215 is 1.5A, but this can be limited by the thermal performance of the package and the PCB. Make sure to check the thermal derating curves in the datasheet to ensure that the device can deliver the required current in your specific application.
  • The LT1215 is rated for operation up to 125°C, but the device's performance and reliability may degrade at high temperatures. Make sure to check the datasheet for thermal derating curves and consider using a heat sink or other thermal management techniques if operating in a high-temperature environment.
  • To troubleshoot issues with the LT1215, start by checking the input voltage, output voltage, and output current. Use an oscilloscope to check for oscillations or other anomalies. Also, check the PCB layout and component values to ensure they match the recommended values. If the issue persists, consider consulting the datasheet or contacting Analog Devices' technical support.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LT1215ACN8#PBF Overview

Use the download button to access the LT1215ACN8#PBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LT121, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LT1215ACN8#PBF

Showing 0 results

LT1215ACN8#PBF Alternates

Showing results

Image Part Number Model
Part Image LT1215ACN8#PBF Linear Technology

Operational Amplifier, 2 Func, 550uV Offset-Max, BIPolar, PDIP8

Part Image LT1215ACN8 Linear Technology

Operational Amplifier, 2 Func, 550uV Offset-Max, BIPolar, PDIP8