Part Image

LT1819IMS8#PBF - Analog Devices

Description: IC OPAMP VFB 400MHZ 8MSOP

Download LT1819IMS8#PBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
LT1819IMS8#PBF - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - MS8 MSOP
click to zoom
3D Models
LT1819IMS8#PBF - Analog Devices  - 3D model - Small Outline Packages - MS8 MSOP
click to zoom

LT1819IMS8#PBF Details

  • Manufacturer Part Number:

    LT1819IMS8#PBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    PLASTIC, MSOP-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    05-08-1660

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    8.5

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    12 µA

  • Bias Current-Max (IIB) @25C:

    8 µA

  • Common-mode Reject Ratio-Min:

    75 dB

  • Common-mode Reject Ratio-Nom:

    85 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    3000 µV

  • JESD-30 Code:

    S-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Low-Bias:

    NO

  • Low-Offset:

    YES

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -6.3 V

  • Neg Supply Voltage-Nom (Vsup):

    -5 V

  • Number of Functions:

    2

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP8,.19

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.1 mm

  • Slew Rate-Nom:

    2500 V/us

  • Supply Current-Max:

    26 mA

  • Supply Voltage Limit-Max:

    6.3 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    400000

  • Voltage Gain-Min:

    1500

  • Wideband:

    YES

  • Width:

    3 mm

LT1819IMS8#PBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LT1819 involves keeping the input and output traces short and wide, using a solid ground plane, and placing the input and output capacitors close to the device. A 4-layer PCB with a dedicated ground plane is recommended.
  • To ensure stability in high-gain configurations, it's essential to follow the recommended compensation network and component values, and to ensure that the device is properly bypassed. Additionally, the input and output impedance should be matched to minimize ringing and oscillations.
  • The maximum power dissipation of the LT1819 is dependent on the package type and the ambient temperature. The maximum power dissipation can be calculated using the formula: Pd = (Vcc x Icc) + (Vout x Iout). The device's thermal resistance (θJA) should also be considered to ensure safe operation.
  • Yes, the LT1819 can be used as a unity-gain buffer. However, it's essential to ensure that the input impedance is matched to the source impedance, and that the output impedance is matched to the load impedance. Additionally, the device's bandwidth and distortion should be considered to ensure that the signal is not degraded.
  • To protect the LT1819 from overvoltage and ESD damage, it's recommended to use voltage clamps, such as TVS diodes, and ESD protection devices, such as ESD arrays. Additionally, the device should be handled and stored in accordance with ESD-safe practices.

Trust Checks

This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LT1819IMS8#PBF Overview

Use the download button to access the LT1819IMS8#PBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LT181, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LT1819IMS8#PBF

Showing 0 results

LT1819IMS8#PBF Alternates

Showing results

Image Part Number Model
Part Image LT1819IMS8#TRPBF Analog Devices Inc

Operational Amplifier, 2 Func, 3000uV Offset-Max, BIPolar, PDSO8

Part Image LT1819IMS8#PBF Linear Technology

Operational Amplifier, 2 Func, 3000uV Offset-Max, BIPolar, PDSO8

Part Image LT1819IMS8#TRPBF Linear Technology

LT1819 - 400MHz, 2500V/µs, 9mA Dual Operational Amplifiers; Package: MSOP; Pins: 8; Temperature Range: -40°C to 85°C

Part Image LT1819IMS8 Linear Technology

Operational Amplifier, 2 Func, 3000uV Offset-Max, BIPolar, PDSO8

Part Image LT1819IMS8#TR Analog Devices Inc

Operational Amplifier, 2 Func, 3000uV Offset-Max, BIPolar, PDSO8

For a full list of alternate parts for LT1819IMS8#PBF, check out Findchips.com