Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LTC2862MPS8-2#TRPBF - Analog Devices

Description: ±60V Fault Protected 3V to 5.5V RS485/RS422 Transceivers

Download LTC2862MPS8-2#TRPBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LTC2862MPS8-2#TRPBF - Analog Devices - PCB symbol
click to zoom
PCB Footprints
LTC2862MPS8-2#TRPBF - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - S8 Package 8-Lead Plastic Small Outline(Narrow .150 Inch)
click to zoom
3D Models
LTC2862MPS8-2#TRPBF - Analog Devices - 3D model - Small Outline Packages - S8 Package 8-Lead Plastic Small Outline(Narrow .150 Inch)
click to zoom

LTC2862MPS8-2#TRPBF Details

  • Manufacturer Part Number:

    LTC2862MPS8-2#TRPBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    SO-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    05-08-1610 (S8)

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000005 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-485; EIA-422

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9025 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -55 °C

  • Out Swing-Min:

    1.5 V

  • Output Low Current-Max:

    0.003 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Receive Delay-Max:

    65 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.752 mm

  • Supply Current-Max:

    8 mA

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    MILITARY

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    1500 ns

  • Width:

    3.899 mm

LTC2862MPS8-2#TRPBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LTC2862MPS8-2 involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer board with a dedicated layer for the analog signals, and to minimize the length of the traces connecting the device to the power supply and other components.
  • To ensure proper power-up and configuration of the LTC2862MPS8-2, follow the recommended power-up sequence, which involves applying the power supply voltage to the device before applying the clock signal. Additionally, make sure to configure the device's registers according to the datasheet and application notes, and to use the correct clock frequency and mode.
  • The LTC2862MPS8-2 has a maximum junction temperature of 150°C. To ensure it doesn't overheat, make sure to provide adequate heat sinking, such as a thermal pad or heat sink, and to keep the device away from other heat sources. Additionally, follow the recommended operating conditions and avoid exceeding the maximum power dissipation.
  • To troubleshoot issues with the LTC2862MPS8-2, start by reviewing the datasheet and application notes to ensure proper configuration and operation. Use a logic analyzer or oscilloscope to monitor the device's signals and verify that they are correct. Check for any signs of overheating, and verify that the power supply voltage and clock frequency are within the recommended ranges.
  • Yes, the LTC2862MPS8-2 is a high-speed device and can be susceptible to electromagnetic interference (EMI). To minimize EMI, use a shielded enclosure, keep the device away from other sources of EMI, and use EMI filters or shielding on the PCB. Additionally, follow good PCB layout practices, such as using a solid ground plane and minimizing the length of the traces.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LTC2862MPS8-2#TRPBF Overview

Use the download button to access the LTC2862MPS8-2#TRPBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LTC28, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LTC2862MPS8-2#TRPBF

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑