Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LTC3407AEMSE-2#TRPBF - Analog Devices

Description: High Efficiency: Up to 95% ■ Low Ripple (<35mVPK-PK) Burst Mode Operation; IQ = 40μA ■ 2.25MHz Constant Frequency Operation ■ No Schottky Diodes Required ■ Low RDS(ON) Internal Switches: 0.35Ω ■ Current Mode Operation for Excellent Line and Load Transient Response ■ Short-Circuit Protected ■ Low Dropout Operation: 100% Duty Cycle ■ Ultralow Shutdown Current: IQ <1μA ■ Output Voltages from 5V down to 0.6V ■ Power-On Reset Output ■ Externally Synchronizable Oscillator ■ Optional External Soft-St

Download LTC3407AEMSE-2#TRPBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LTC3407AEMSE-2#TRPBF - Analog Devices - PCB symbol
click to zoom
PCB Footprints
LTC3407AEMSE-2#TRPBF - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - MSE Package 10-Lead Plastic MSOP (Reference LTC DWG # 05-08-1664 Rev C)
click to zoom
3D Models
LTC3407AEMSE-2#TRPBF - Analog Devices - 3D model - Small Outline Packages - MSE Package 10-Lead Plastic MSOP (Reference LTC DWG # 05-08-1664 Rev C)
click to zoom

LTC3407AEMSE-2#TRPBF Details

  • Manufacturer Part Number:

    LTC3407AEMSE-2#TRPBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    LEAD FREE, PLASTIC, MSOP-10

  • Pin Count:

    10

  • Manufacturer Package Code:

    05-08-1664

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    8.5

  • Analog IC - Other Type:

    DUAL SWITCHING CONTROLLER

  • Control Mode:

    CURRENT-MODE

  • Control Technique:

    CONSTANT FREQUENCY

  • Input Voltage-Max:

    5.5 V

  • Input Voltage-Min:

    2.5 V

  • Input Voltage-Nom:

    3.6 V

  • JESD-30 Code:

    S-PDSO-G10

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    2

  • Number of Terminals:

    10

  • Operating Temperature-Max:

    85 °C

  • Output Current-Max:

    1.6 A

  • Output Voltage-Max:

    5 V

  • Output Voltage-Min:

    0.6 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HTSSOP

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.1 mm

  • Supply Current-Max (Isup):

    0.95 mA

  • Surface Mount:

    YES

  • Switcher Configuration:

    BUCK

  • Switching Frequency-Max:

    2700 kHz

  • Technology:

    CMOS

  • Temperature Grade:

    OTHER

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3 mm

LTC3407AEMSE-2#TRPBF Frequently Asked Questions (FAQs)

  • The maximum input voltage that can be applied to the LTC3407AEMSE-2#TRPBF is 15V, but it's recommended to keep it below 12V for optimal performance and reliability.
  • To ensure the stability of the output voltage, it's essential to follow the recommended layout and component selection guidelines, including the use of a suitable output capacitor and a low-ESR input capacitor. Additionally, the input voltage should be well-regulated and free of noise.
  • The LTC3407AEMSE-2#TRPBF is rated for operation up to 125°C, but it's essential to consider the thermal management and derating of the device under high-temperature conditions. The device's performance and reliability may be affected at high temperatures, so it's crucial to consult the datasheet and application notes for guidance.
  • The power dissipation of the LTC3407AEMSE-2#TRPBF can be calculated using the formula: Pd = (Vin - Vout) x Iout + (Vin x Iq), where Vin is the input voltage, Vout is the output voltage, Iout is the output current, and Iq is the quiescent current. It's essential to consider the thermal management and heat sinking requirements to ensure the device operates within its specified temperature range.
  • Yes, the LTC3407AEMSE-2#TRPBF can be used in a parallel configuration to increase the output current, but it's essential to follow the recommended guidelines and application notes to ensure proper synchronization and current sharing between the devices.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LTC3407AEMSE-2#TRPBF Overview

Use the download button to access the LTC3407AEMSE-2#TRPBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LTC34, or try a keyword search, such as Switching Regulator or Controllers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LTC3407AEMSE-2#TRPBF

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

LTC3407AEMSE-2#TRPBF Alternates

Showing results

Image Part Number Model
Part Image LTC3407AEMSE-2#TRPBF Linear Technology

Dual Switching Controller, Current-mode, 1.6A, 2700kHz Switching Freq-Max, CMOS, PDSO10
Part Image LTC3407AIMSE-2#TR Linear Technology

Dual Switching Controller, Current-mode, 1.6A, 2700kHz Switching Freq-Max, CMOS, PDSO10
Part Image LTC3407AIMSE-2#TRPBF Linear Technology

Dual Switching Controller, Current-mode, 1.6A, 2700kHz Switching Freq-Max, CMOS, PDSO10
Part Image LTC3407AIMSE-2#TR Analog Devices Inc

Dual Switching Controller, Current-mode, 1.6A, 2700kHz Switching Freq-Max, CMOS, PDSO10
Part Image LTC3407AEMSE-2 Analog Devices Inc

Dual Switching Controller, Current-mode, 1.6A, 2700kHz Switching Freq-Max, CMOS, PDSO10
For a full list of alternate parts for LTC3407AEMSE-2#TRPBF, check out Findchips.com