Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LTC3525ISC6-5#TRMPBF - Analog Devices

Description: 400mA Micropower Synchronous Step-Up DC/DC Converter with Output Disconnect

Download LTC3525ISC6-5#TRMPBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LTC3525ISC6-5#TRMPBF - Analog Devices - PCB symbol
click to zoom
PCB Footprints
LTC3525ISC6-5#TRMPBF - Analog Devices PCB footprint - SOT23 (6-Pin) - SOT23 (6-Pin) - .SC6 Package - 6 Lead Plastic SC70
click to zoom
3D Models
LTC3525ISC6-5#TRMPBF - Analog Devices - 3D model - SOT23 (6-Pin) - .SC6 Package - 6 Lead Plastic SC70
click to zoom

LTC3525ISC6-5#TRMPBF Details

  • Manufacturer Part Number:

    LTC3525ISC6-5#TRMPBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    SC-70, 6 PIN

  • Pin Count:

    6

  • Manufacturer Package Code:

    05-08-1638

  • Country Of Origin:

    Thailand

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Analog IC - Other Type:

    SWITCHING REGULATOR

  • Control Mode:

    CURRENT-MODE

  • Control Technique:

    BURST MODE

  • Input Voltage-Max:

    4.5 V

  • Input Voltage-Min:

    0.5 V

  • Input Voltage-Nom:

    2.4 V

  • JESD-30 Code:

    R-PDSO-G6

  • Length:

    2 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Current-Max:

    0.4 A

  • Output Voltage-Max:

    5.15 V

  • Output Voltage-Min:

    4.85 V

  • Output Voltage-Nom:

    5 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    VSSOP

  • Package Equivalence Code:

    TSSOP6,.08

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH

  • Seated Height-Max:

    1 mm

  • Surface Mount:

    YES

  • Switcher Configuration:

    BOOST

  • Technology:

    CMOS

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Width:

    1.25 mm

LTC3525ISC6-5#TRMPBF Frequently Asked Questions (FAQs)

  • The maximum input voltage that can be applied to the LTC3525 is 18V, but it's recommended to keep it below 15V for optimal performance and reliability.
  • To optimize inductor selection, consider the inductor's saturation current, DC resistance, and core loss. A good starting point is to choose an inductor with a saturation current at least 1.5 times the peak current, and a DC resistance less than 100mΩ. Also, consider using a shielded inductor to reduce EMI.
  • For optimal performance, keep the input and output capacitors close to the IC, and use a solid ground plane to reduce noise. Keep the high-current paths (e.g., from VIN to L1 and from L1 to VOUT) short and wide, and avoid routing them near sensitive nodes. Also, consider using a 4-layer PCB with a dedicated power plane to reduce noise and improve thermal performance.
  • Start by checking the input voltage, output voltage, and current. Verify that the input voltage is within the recommended range, and that the output voltage is within the desired range. Check for any signs of overheating, and ensure that the PCB layout is correct. Use an oscilloscope to check for any unusual waveforms or noise on the input or output. If still unsure, consult the datasheet and application notes, or contact Analog Devices' support team.
  • The LTC3525 is rated for operation up to 125°C, but its performance may degrade at high temperatures. Ensure that the device is properly heatsinked, and consider derating the output current and voltage to prevent overheating. Also, consult the datasheet and application notes for guidance on high-temperature operation.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LTC3525ISC6-5#TRMPBF Overview

Use the download button to access the LTC3525ISC6-5#TRMPBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LTC35, or try a keyword search, such as Switching Regulator or Controllers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LTC3525ISC6-5#TRMPBF

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑