Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LTC3526EDC#TRPBF - Analog Devices

Description: 500mA 1MHz Synchronous Step-Up DC/DC Converters in 2mm ?? 2mm DFN

Download LTC3526EDC#TRPBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LTC3526EDC#TRPBF - Analog Devices - PCB symbol
click to zoom
PCB Footprints
LTC3526EDC#TRPBF - Analog Devices PCB footprint - Small Outline No-lead - Small Outline No-lead - DC6 Package 6-Lead Plastic DFN (2mm × 2mm) (Reference LTC DWG # 05-08-1703 Rev C)-2
click to zoom
3D Models
LTC3526EDC#TRPBF - Analog Devices - 3D model - Small Outline No-lead - DC6 Package 6-Lead Plastic DFN (2mm × 2mm) (Reference LTC DWG # 05-08-1703 Rev C)-2
click to zoom

LTC3526EDC#TRPBF Details

  • Manufacturer Part Number:

    LTC3526EDC#TRPBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Pin Count:

    6

  • Manufacturer Package Code:

    05-08-1703

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Additional Feature:

    ALSO OPERATES IN ADJUSTABLE MODE FROM 1.6V TO 5.25V

  • Analog IC - Other Type:

    SWITCHING REGULATOR

  • Control Mode:

    CURRENT-MODE

  • Control Technique:

    PULSE WIDTH MODULATION

  • Input Voltage-Min:

    1 V

  • Input Voltage-Nom:

    1.2 V

  • JESD-30 Code:

    S-PDSO-N6

  • JESD-609 Code:

    e3

  • Length:

    2 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    85 °C

  • Output Current-Max:

    0.7 A

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVSON

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    0.8 mm

  • Surface Mount:

    YES

  • Switcher Configuration:

    BOOST

  • Switching Frequency-Max:

    1300 kHz

  • Technology:

    CMOS

  • Temperature Grade:

    OTHER

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    2 mm

LTC3526EDC#TRPBF Frequently Asked Questions (FAQs)

  • The maximum input voltage that can be applied to the LTC3526EDC is 18V, but it's recommended to keep it below 15V for optimal performance and reliability.
  • To optimize inductor selection, consider the inductor's saturation current, DC resistance, and core loss. A good starting point is to choose an inductor with a saturation current at least 1.5 times the peak current, and a DC resistance less than 100mΩ. Also, consider using a shielded inductor to reduce EMI.
  • To minimize EMI and noise, keep the switching node (SW pin) away from sensitive analog nodes, use a solid ground plane, and keep the input and output capacitors close to the IC. Also, use a Kelvin connection for the output voltage sense lines and keep them away from the switching node.
  • To troubleshoot, first check the input voltage, output voltage, and feedback voltage (FB pin) using an oscilloscope. Verify that the feedback voltage is within the specified range (0.8V to 2.5V). Also, check the output capacitor value and ESR, and ensure that the inductor is not saturating. If the issue persists, consult the datasheet and application notes for further guidance.
  • The LTC3526EDC is rated for operation up to 125°C, but the maximum junction temperature (TJ) should not exceed 150°C. Ensure that the device is properly heatsinked and that the thermal design is adequate for the specific application. Consult the datasheet and thermal management guidelines for more information.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LTC3526EDC#TRPBF Overview

Use the download button to access the LTC3526EDC#TRPBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LTC35, or try a keyword search, such as Switching Regulator or Controllers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LTC3526EDC#TRPBF

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

LTC3526EDC#TRPBF Alternates

Showing results

Image Part Number Model
Part Image LTC3526EDC#TR Linear Technology

Switching Controller, Current-mode, 0.5A, 1300kHz Switching Freq-Max, CMOS, PDSO6
Part Image LTC3526EDC#TRPBF Linear Technology

Switching Controller, Current-mode, 0.7A, 1300kHz Switching Freq-Max, CMOS, PDSO6