Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LTC6563IUDDM#PBF - Analog Devices

Description: Four-Channel Transimpedance Amplifier with Output Multiplexing

Download LTC6563IUDDM#PBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LTC6563IUDDM#PBF - Analog Devices - PCB symbol
click to zoom
PCB Footprints
LTC6563IUDDM#PBF - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - UDDM Package 24-Lead Plastic Side Solderable QFN (3mm × 5mm) (Reference LTC DWG # 05-08-1795 Rev Ø)
click to zoom
3D Models
LTC6563IUDDM#PBF - Analog Devices - 3D model - Quad Flat No-Lead - UDDM Package 24-Lead Plastic Side Solderable QFN (3mm × 5mm) (Reference LTC DWG # 05-08-1795 Rev Ø)
click to zoom

LTC6563IUDDM#PBF Details

  • Manufacturer Part Number:

    LTC6563IUDDM#PBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    QFN-24

  • Pin Count:

    24

  • Manufacturer Package Code:

    05-08-1795

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    8.5

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Frequency Compensation:

    YES

  • JESD-30 Code:

    R-PQCC-N24

  • Length:

    5 mm

  • Low-Bias:

    NO

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    4

  • Number of Terminals:

    24

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVQCCN

  • Package Shape:

    RECTANGULAR

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Power:

    NO

  • Programmable Power:

    NO

  • Seated Height-Max:

    0.8 mm

  • Slew Rate-Nom:

    3000 V/us

  • Supply Current-Max:

    40.4 mA

  • Supply Voltage Limit-Max:

    3.6 V

  • Supply Voltage-Nom (Vsup):

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Wideband:

    NO

  • Width:

    3 mm

LTC6563IUDDM#PBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LTC6563IUDDM involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the analog signal sources. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • To ensure proper powering and decoupling of the LTC6563IUDDM, use a high-quality, low-ESR capacitor (e.g., 10uF ceramic) between the VCC and GND pins, and a smaller capacitor (e.g., 100nF ceramic) between the AVCC and AGND pins. Additionally, use a separate power supply for the analog and digital sections, and ensure that the power supply is well-regulated and low-noise.
  • The maximum clock frequency that can be used with the LTC6563IUDDM is 100MHz. However, the actual clock frequency used may be limited by the specific application and the quality of the clock signal.
  • To configure the LTC6563IUDDM for optimal dynamic range and SNR, set the gain to the minimum required value, use a high-quality, low-noise reference voltage, and ensure that the input signal is properly filtered and amplified. Additionally, use the device's built-in calibration features to optimize the performance.
  • The typical power consumption of the LTC6563IUDDM is around 350mW, but this can vary depending on the specific application, clock frequency, and operating conditions.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LTC6563IUDDM#PBF Overview

Use the download button to access the LTC6563IUDDM#PBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LTC65, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LTC6563IUDDM#PBF

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑