LTR18EZPFU10L0 footprint, schematic symbol and 3D model by ROHM Semiconductor

Symbol

PCB Footprints

3D Models

LTR18EZPFU10L0 Details

A recommended PCB layout for optimal thermal performance would be to have a large copper area on the bottom layer connected to the thermal pad, and to use thermal vias to dissipate heat. Additionally, keeping the component away from other heat sources and using a heat sink can also improve thermal performance.
To ensure the stability of the output voltage, it is recommended to use a capacitor with a low ESR (Equivalent Series Resistance) and a high capacitance value (e.g. 10uF or higher) at the output. Additionally, using a capacitor with a low ESL (Equivalent Series Inductance) can also help to reduce noise and improve stability.
The maximum input voltage that can be applied to the LTR18EZPFU10L0 is 36V. Exceeding this voltage may cause damage to the device.
To protect the LTR18EZPFU10L0 from overcurrent and overheating, it is recommended to use a current limiting resistor or a fuse in series with the input, and to implement overtemperature protection using a thermal sensor or a thermistor.
The recommended input capacitor value for the LTR18EZPFU10L0 is 1uF to 10uF, and the recommended type is a ceramic capacitor with a low ESR and a high ripple current rating.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the LTR18EZPFU10L0 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like LTR18, or try a keyword search, such as Fixed Resistors

If you searched for LTR18EZPFU10L0, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →