LTV-816S footprint, schematic symbol and 3D model by Lite-On

Symbol

PCB Footprints

3D Models

LTV-816S Details

A 2-layer or 4-layer PCB with a solid ground plane and thermal vias is recommended. Keep the component away from heat sources and ensure good airflow.
Use a heat sink with a thermal resistance of 10°C/W or lower, and ensure good airflow. Also, consider derating the device's power dissipation according to the ambient temperature.
The maximum allowable voltage on the input pins is 5.5V, but it's recommended to keep it below 5V to ensure reliable operation and prevent damage.
Yes, but ensure the device is properly bypassed and decoupled, and the switching frequency is within the recommended range (typically below 1 MHz).
Use ESD protection devices such as TVS diodes or ESD arrays on the input lines, and ensure the PCB design follows ESD-safe handling practices.

Expert Contribution

System Verified

Community Approved

Use the download button to access the LTV-816S schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like LTV-8, or try a keyword search, such as Optocoupler

If you searched for LTV-816S, you might also be interested in these parts:

Showing 0 results

Image	Part Number	Model
	LTV816SA-TA1 Lite-On Semiconductor Corporation 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, DIP-4
	LTV816SA-V Lite-On Semiconductor Corporation Transistor Output Optocoupler, 1-Element, 5000V Isolation
	LTV816ML-V Lite-On Semiconductor Corporation Transistor Output Optocoupler, 1-Element, 5000V Isolation
	LTV-816SA Lite-On Semiconductor Corporation 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, DIP-4
	LTV-816SATA1-V Lite-On Semiconductor Corporation 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, DIP-4
For a full list of alternate parts for LTV-816S, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →