M24M01X-FCU6T/VF - STMicroelectronics

M24M01X-FCU6T/VF Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the M24M01X-FCU6T/VF?
  The recommended operating voltage range for the M24M01X-FCU6T/VF is 1.7V to 5.5V, with a typical operating voltage of 3.3V or 5V.
• How do I handle the HOLD pin during power-up and power-down?
  During power-up, the HOLD pin should be kept high until the power supply has reached a stable voltage. During power-down, the HOLD pin should be kept low to prevent any unwanted writes to the memory.
• What is the maximum clock frequency for the M24M01X-FCU6T/VF?
  The maximum clock frequency for the M24M01X-FCU6T/VF is 10 MHz, but it can be operated at lower frequencies down to 10 kHz.
• How do I ensure data integrity during power-down or brownout conditions?
  To ensure data integrity, use a voltage supervisor or a power-on reset circuit to detect power-down or brownout conditions and prevent any writes to the memory during these events.
• What is the purpose of the WP pin, and how do I use it?
  The WP (Write Protect) pin is used to protect the memory from unwanted writes. When the WP pin is tied to VCC, the memory is write-protected. When the WP pin is tied to GND, the memory is write-enabled.