3D Models
Note! To download footprints and symbols, use the build and request forms below
Request (48 hours)
- Datasheet Download Datasheet
- Stock & Prices $ Price & Stock for MA46H120
- Part Number MA46H120
- Manufacturer MACOM
- Pin Count 2
- Part Category Integrated Circuit
- Last Modified Date Jul 15, 2025 4:10 PM UTC
- Pinout / Pin List Click Here (Member Only)
MA46H120 Details
-
Manufacturer Part Number:
MA46H120
-
Part Life Cycle Code:
Transferred
-
Pin Count:
2
-
ECCN Code:
EAR99
-
HTS Code:
8541.10.00.80
-
Manufacturer:
MACOM
-
YTEOL:
7.32
-
Breakdown Voltage-Min:
20 V
-
Configuration:
SINGLE
-
Diode Capacitance-Nom:
1.1 pF
-
Diode Element Material:
GALLIUM ARSENIDE
MA46H120 Frequently Asked Questions (FAQs)
-
A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The device should be placed near the edge of the board to minimize thermal resistance. A thermal via array under the device can also improve heat dissipation.
-
The MA46H120 requires a bias voltage of 5V and a bias current of 100mA. A voltage regulator and a current limiting resistor can be used to ensure the device is properly biased. Additionally, a decoupling capacitor should be placed close to the device to filter out noise.
-
The MA46H120 has an operating temperature range of -40°C to 85°C. However, the device's performance may degrade at higher temperatures, and it's recommended to keep the junction temperature below 125°C to ensure reliability.
-
The MA46H120 is a sensitive device and requires ESD protection. Handling the device by the body or using an ESD wrist strap can prevent damage. Additionally, using an ESD-protected workstation and storing the device in an anti-static bag can also prevent damage.
-
The MA46H120 has a recommended soldering profile of 260°C for 10 seconds. A soldering iron with a temperature control is recommended to prevent overheating the device.
Trust Checks
Trust Score Unavailable
MA46H120 Overview
Use the download button to access the MA46H120 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
