MACOM recommends a 4-layer PCB with a solid ground plane, and thermal vias under the device to dissipate heat. A thermal pad on the bottom of the package should be connected to a heat sink or a thermal management system.
MACOM provides a recommended PCB layout and impedance matching circuit in the application note AN-60-015. Additionally, the device's input and output impedances are 50 ohms, so a conjugate match is recommended for optimal performance.
The MAAM-011156-TR1000 is rated for operation from -40°C to 85°C, but derating is required for temperatures above 70°C. Consult the datasheet for specific derating guidelines.
Yes, the MAAM-011156-TR1000 can be used in a push-pull configuration, but it's essential to ensure proper impedance matching and biasing to avoid oscillations and maintain stability.
MACOM recommends a voltage-controlled biasing scheme, with a voltage regulator and a resistive divider network to set the bias voltage. The recommended bias voltage is 5V, but consult the datasheet for specific guidelines.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MAAM-011156-TR1000 Overview
Use the download button to access the MAAM-011156-TR1000 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MAAM-,
or try a keyword search, such as RF/Microwave Amplifiers
