MACOM recommends a 4-layer PCB with a solid ground plane, and thermal vias under the device to dissipate heat. A thermal pad on the bottom of the device should be connected to a heat sink or a thermal management system.
The device requires a bias tee or a DC block to provide the correct voltage and current. A bias voltage of 5V and a current of 350mA is recommended. The bias circuit should be designed to provide a low impedance path to ground.
MACOM recommends a conjugate match at the input and output ports to achieve optimal performance. A 50Ω system impedance is assumed. The matching network should be designed to provide a return loss of at least 15dB.
The device is sensitive to ESD and requires proper handling and storage procedures. MACOM recommends using an ESD wrist strap or mat, and storing the device in an anti-static bag or container.
The recommended operating temperature range for the MADL-011015-001 is -40°C to 85°C. Operating the device outside this range may affect its performance and reliability.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MADL-011015-001 Overview
Use the download button to access the MADL-011015-001 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MADL-,
or try a keyword search, such as RF/Microwave Limiters
