MACOM recommends a 4-layer PCB with a solid ground plane, and thermal vias under the device to dissipate heat. A thermal pad on the bottom of the device should be connected to a heat sink or a thermal management system.
The MADP-017015-13140G requires a bias tee or a DC block to provide the necessary DC voltage and current. Ensure the bias voltage is within the recommended range (typically 5-15V) and the current is limited to the recommended maximum (typically 100-200mA).
The typical insertion loss of the MADP-017015-13140G is around 1-2 dB, and the return loss is typically above 15 dB across the operating frequency range.
The MADP-017015-13140G is an ESD-sensitive device. Handle it with ESD-protective equipment, such as wrist straps, mats, and bags. Ensure the device is properly grounded during assembly, and avoid touching the pins or exposed pads.
The recommended storage temperature range is -40°C to 150°C, and the operating temperature range is -40°C to 85°C. Ensure the device is stored and operated within these ranges to maintain its performance and reliability.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MADP-017015-13140G Overview
Use the download button to access the MADP-017015-13140G 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MADP-,
or try a keyword search, such as PIN Diodes
