Description:The MAPU01H series is a new range of isolated 1W DC-DC converter modules in SIP-7 package which feature a high I/O isolation voltage rated for 3000VDC . Advanced circuit topology provides continuous overload, short circuit protection and a high efficiency up to 84% which allows operating ambient temperatures range of -40℃ to +85℃ without power derating.
The recommended PCB layout should ensure good thermal conductivity and minimal thermal resistance. A thermal pad on the bottom of the device should be connected to a large copper area on the PCB. Additionally, a heat sink or a metal core PCB can be used to improve thermal management. Minmax Technology recommends following the JEDEC standard for thermal management.
To ensure reliability and long-term stability, it's essential to follow the recommended operating conditions, such as input voltage, output voltage, and ambient temperature. Additionally, proper PCB design, component selection, and soldering quality are crucial. It's also recommended to implement overvoltage, undervoltage, and overcurrent protection to prevent damage to the device.
The maximum allowable capacitance for the output filter capacitor is not explicitly stated in the datasheet. However, as a general rule, the output capacitance should be limited to 10-20 times the input capacitance to prevent oscillation and ensure stability. In this case, the recommended output capacitance is around 10-20uF.
The MAPU01-24S05H is designed to operate in a wide range of environments, but it's essential to ensure that the device is properly secured to the PCB and that the PCB is designed to withstand vibrations. Minmax Technology recommends following the IPC standards for PCB design and assembly to ensure reliability in high-vibration environments.
The typical efficiency of the MAPU01-24S05H varies depending on the load. According to the datasheet, the efficiency is around 85-90% at full load (5A) and around 80-85% at half load (2.5A). The efficiency may be lower at lighter loads. It's recommended to consult the datasheet or contact Minmax Technology for more detailed information.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MAPU01-24S05H Overview
Use the download button to access the MAPU01-24S05H schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAPU0,
or try a keyword search, such as Power Supply Modules
