Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAU129 - Minmax

Description: The MAU100 series is a range of 1W DC-DC converters in a small SIP Package featuring I/O isolation of 1000VDC. An excellent efficiency allows an operating temperature range of –40℃ to +85℃. These converters offer an economical solution for many applications where a voltage has to be isolated.

Download MAU129 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAU129 - Minmax - PCB symbol
click to zoom
PCB Footprints
MAU129 - Minmax PCB footprint - Other - Other - MAU100_Dual
click to zoom
3D Models
MAU129 - Minmax - 3D model - Other - MAU100_Dual
click to zoom

MAU129 Details

  • Manufacturer Part Number:

    MAU129

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    SIP-7/5

  • ECCN Code:

    EAR99

  • Manufacturer:

    Minmax Technology Co Ltd

  • YTEOL:

    5

  • Additional Feature:

    -15V ADDITIONAL OUTPUT AVAILABLE

  • Analog IC - Other Type:

    DC-DC UNREGULATED POWER SUPPLY MODULE

  • Approvals:

    CB, CSA, CUL, EN, IEC, UL

  • Efficiency (Main Output):

    80%

  • Input Voltage-Max:

    26.4 V

  • Input Voltage-Min:

    21.6 V

  • Input Voltage-Nom:

    24 V

  • JESD-30 Code:

    R-PSIP-T5

  • Length:

    19.5 mm

  • Line Regulation-Max:

    1.5%

  • Load Regulation-Max:

    5%

  • Number of Functions:

    1

  • Number of Outputs:

    2

  • Number of Terminals:

    5

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Current-Max:

    0.034 A

  • Output Voltage-Max:

    15.45 V

  • Output Voltage-Min:

    14.55 V

  • Output Voltage-Nom:

    15 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SIP

  • Package Equivalence Code:

    SIP5/7,.05

  • Package Shape:

    RECTANGULAR

  • Package Style:

    IN-LINE

  • Protections:

    SHORT CIRCUIT

  • Ripple Voltage (Main Out):

    0.0265125 Vrms

  • Seated Height-Max:

    10.75 mm

  • Surface Mount:

    NO

  • Technology:

    HYBRID

  • Terminal Form:

    THROUGH-HOLE

  • Terminal Pitch:

    2.54 mm

  • Terminal Position:

    SINGLE

  • Total Power Output-Max:

    1 W

  • Trim/Adjustable Output:

    NO

  • Width:

    7.1 mm

MAU129 Frequently Asked Questions (FAQs)

  • Minmax recommends a 4-layer PCB with a solid ground plane, and thermal vias under the device to dissipate heat. A minimum of 1 oz copper thickness is recommended. Additionally, a thermal pad on the bottom of the device should be connected to a heat sink or a thermal management system.
  • Minmax recommends following the JEDEC J-STD-020D.1 standard for reflow soldering. The device should be soldered using a peak temperature of 260°C for 10-30 seconds. Avoid exposing the device to temperatures above 260°C or using excessive soldering times, as this can cause damage.
  • Minmax recommends using a low-ESR ceramic capacitor with a value of 10-22 μF, and a voltage rating of 25-50 V. The capacitor should be placed as close as possible to the VIN pin of the MAU129.
  • Minmax recommends using a oscilloscope to monitor the input and output voltages, as well as the switching frequency. Check for proper PCB layout, thermal management, and soldering. Verify that the input voltage is within the recommended range and that the output voltage is within the specified tolerance.
  • Minmax guarantees a minimum of 3 years of operation under normal operating conditions, with a failure rate of less than 1% per 1000 hours. The device is designed to meet the requirements of IEC 62391 and IEC 61709 standards for reliability and lifespan.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAU129 Overview

Use the download button to access the MAU129 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAU12, or try a keyword search, such as Power Supply Modules

Parts related to MAU129

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑