MACOM recommends a 4-layer PCB with a solid ground plane, and thermal vias under the device to dissipate heat. A thermal pad on the bottom of the package should be connected to a heat sink or a thermal management system.
The device requires a bias tee or a DC block to provide the necessary DC voltage and current. A bias voltage of 5V to 12V is recommended, and the current limit should be set to 100mA to 200mA depending on the application.
MACOM recommends using a pi-network or a T-network for input and output matching. The specific component values will depend on the operating frequency and the desired impedance match.
The device is sensitive to ESD, so proper handling and storage procedures should be followed. Use an ESD wrist strap or mat, and store the devices in anti-static packaging to prevent damage.
The recommended operating temperature range is -40°C to 85°C. However, the device can operate up to 100°C with reduced performance and reliability.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MAVR-000120-14110G Overview
Use the download button to access the MAVR-000120-14110G 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MAVR-,
or try a keyword search, such as Varactors
