MACOM recommends a 4-layer PCB with a solid ground plane, and thermal vias under the device to dissipate heat. A thermal pad on the bottom of the package should be connected to a large copper area on the PCB to improve heat dissipation.
The device requires a bias tee or a DC block to provide the necessary DC voltage and current. A bias voltage of 5V to 12V is recommended, and the current limit should be set to 100mA to 200mA depending on the application.
The input and output of the MAVR-011020-14110P require a matching network to achieve optimal performance. A pi-network or a T-network with capacitors and inductors can be used to match the device to 50 ohms. The exact values of the components depend on the specific application and frequency range.
The device has a power-down mode that can be controlled through the enable pin. When the device is in power-down mode, the current consumption is reduced, but the device may take some time to recover when re-enabled. The system design should take into account the power-down mode and ensure that the device is properly re-enabled before transmitting or receiving data.
The MAVR-011020-14110P is a sensitive device and requires proper ESD protection during handling and assembly. It is recommended to use an ESD wrist strap or mat, and to handle the device by the package rather than the pins. The device should be stored in an anti-static bag or container when not in use.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MAVR-011020-14110P Overview
Use the download button to access the MAVR-011020-14110P 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MAVR-,
or try a keyword search, such as Varactors
