Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX13085EESA+ - Analog Devices

Description: Maxim MAX13085EESA+, Line Transceiver, EIA/TIA-485, 4.5 → 5.5 V, 8-Pin SOIC

Download MAX13085EESA+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX13085EESA+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX13085EESA+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 8 SO
click to zoom
3D Models
MAX13085EESA+ - Analog Devices - 3D model - Small Outline Packages - 8 SO
click to zoom

MAX13085EESA+ Details

  • Manufacturer Part Number:

    MAX13085EESA+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOIC_N-150_MIL

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOIC_N-150_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2012-03-08

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    2 V

  • Output Low Current-Max:

    0.001 A

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    200 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    1.8 mA

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    4.5 V

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    1000 ns

  • Width:

    3.9 mm

MAX13085EESA+ Frequently Asked Questions (FAQs)

  • The recommended PCB layout for the MAX13085EESA+ is to use a 4-layer board with a solid ground plane, and to keep the analog and digital signals separate. Additionally, it's recommended to use a low-ESR capacitor for the VCC bypass and to place it as close as possible to the VCC pin.
  • To ensure proper power-up and power-down of the MAX13085EESA+, it's recommended to follow a specific power-up sequence. First, power up the VCC supply, then the VDD supply, and finally the EN pin. During power-down, reverse the sequence. Additionally, make sure to add a power-on reset circuit to ensure the device is properly reset during power-up.
  • The maximum cable length supported by the MAX13085EESA+ depends on the specific application and the type of cable used. However, as a general guideline, the device can support cable lengths up to 100 meters for RS-485 and up to 10 meters for RS-232. It's recommended to use a cable with a characteristic impedance of 120 ohms for RS-485 and 1 kohm for RS-232.
  • To troubleshoot communication issues with the MAX13085EESA+, first check the power supply and ensure it's within the recommended range. Then, verify the correct configuration of the device, including the baud rate, data bits, and parity. Use a logic analyzer or oscilloscope to check the signal integrity and timing. Finally, check for any noise or interference on the communication lines.
  • Yes, the MAX13085EESA+ is compatible with both 3.3V and 5V logic levels. The device has a wide supply voltage range of 3.0V to 5.5V, and its digital inputs are 5V-tolerant. However, it's recommended to use a voltage level translator if the device is connected to a 5V system and the digital inputs are driven by a 3.3V system.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX13085EESA+ Overview

Use the download button to access the MAX13085EESA+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX13, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX13085EESA+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX13085EESA+ Alternates

Showing results

Image Part Number Model
Part Image MAX13085EASA Rochester Electronics LLC

LINE TRANSCEIVER, PDSO8, 0.150 INCH, MS-012AA, SOIC-8
Part Image MAX13085ECSA Rochester Electronics LLC

LINE TRANSCEIVER, PDSO8, 0.150 INCH, MS-012AA, SOIC-8
Part Image MAX13085ECSA+ Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
Part Image MAX13085EESA+ Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
Part Image MAX13085EESA-T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
For a full list of alternate parts for MAX13085EESA+, check out Findchips.com