Part Image

MAX13430EEUB+ - Analog Devices

Description: ● Wide +3V to +5V Input Supply Range ● Low-Voltage Logic Interface +1.62V (min) ● Ultra-Low Supply Current in Shutdown Mode 10μA ICC (max), 1μA IL (max) ● Thermal Shutdown Protection ● Hot-Swap Input Structures on DE and RE ● 1/8-Unit Load Allows Up to 256 Transceivers on the Bus ● Enhanced Slew-Rate Limiting (MAX13430E/MAX13432E) ● Extended ESD Protection for RS-485 I/O Pins • ±30kV Human Body Model • ±15kV Air-Gap Discharge per IEC 61000-4-2 • ±10kV Contact Discharge per IEC 61000-4-2 ● Exte

Download MAX13430EEUB+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MAX13430EEUB+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 10 µMAX
click to zoom
3D Models
MAX13430EEUB+ - Analog Devices  - 3D model - Small Outline Packages - 10 µMAX
click to zoom

MAX13430EEUB+ Details

  • Manufacturer Part Number:

    MAX13430EEUB+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    10-MINI_SO-N/A

  • Package Description:

    MICROPACKAGE-10

  • Pin Count:

    10

  • Manufacturer Package Code:

    10-MINI_SO-N/A

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2008-11-20

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000001 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-485; TIA-485

  • JESD-30 Code:

    S-PDSO-G10

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    10

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.001 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP10,.19,20

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    200 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.1 mm

  • Supply Current-Max:

    2 mA

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    1.62 V

  • Supply Voltage-Nom:

    1.8 V

  • Supply Voltage1-Max:

    5.5 V

  • Supply Voltage1-Min:

    1.62 V

  • Supply Voltage1-Nom:

    1.8 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    800 ns

  • Width:

    3 mm

MAX13430EEUB+ Frequently Asked Questions (FAQs)

  • The recommended PCB layout for the MAX13430EEUB+ is to keep the analog and digital grounds separate, use a solid ground plane, and keep the input and output traces as short as possible. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • To ensure proper power-up and power-down of the MAX13430EEUB+, it's recommended to follow a specific power-up sequence. First, power up the VCC supply, then the VDD supply, and finally the EN pin. During power-down, reverse the sequence. Additionally, ensure that the power supplies are stable and within the recommended operating range.
  • The maximum cable length supported by the MAX13430EEUB+ depends on the specific application and the type of cable used. However, as a general guideline, the MAX13430EEUB+ can support cable lengths up to 100 meters at a data rate of 100 Mbps. For longer cable lengths, it's recommended to use repeaters or active cables.
  • Common issues with the MAX13430EEUB+ include signal integrity issues, power supply noise, and incorrect configuration. To troubleshoot these issues, use an oscilloscope to check the signal quality, ensure that the power supplies are stable and within the recommended operating range, and verify that the device is properly configured. Additionally, check the datasheet and application notes for specific troubleshooting guidelines.
  • The MAX13430EEUB+ is a USB transceiver and is not directly compatible with other interfaces such as SPI or I2C. However, it can be used in conjunction with other devices that provide these interfaces, such as microcontrollers or FPGAs, to enable communication between devices with different interfaces.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX13430EEUB+ Overview

Use the download button to access the MAX13430EEUB+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX13, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX13430EEUB+

Showing 0 results

MAX13430EEUB+ Alternates

Showing results

Image Part Number Model
Part Image MAX13430EEUB+ Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO10

Part Image MAX13430EEUB+T Maxim Integrated Products

Line Driver/Receiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO10