Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX1558HETB+T - Analog Devices

Description: MAXIM INTEGRATED PRODUCTS - MAX1558HETB+T - Current Limited Switch, 2.7 V to 5.5 V in, TDFN-10

Download MAX1558HETB+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX1558HETB+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX1558HETB+T - Analog Devices PCB footprint - Small Outline No-lead - Small Outline No-lead - T1033+1
click to zoom
3D Models
MAX1558HETB+T - Analog Devices - 3D model - Small Outline No-lead - T1033+1
click to zoom

MAX1558HETB+T Details

  • Manufacturer Part Number:

    MAX1558HETB+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    10-LFCSP-3X3X0.75

  • Package Description:

    3 X 3 MM, 0.80 MM HEIGHT, MO-229WEED-3, TDFN-10

  • Pin Count:

    10

  • Manufacturer Package Code:

    10-LFCSP-3X3X0.75

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2004-07-27

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • JESD-609 Code:

    e3

  • Moisture Sensitivity Level:

    1

  • Peak Reflow Temperature (Cel):

    260

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Time@Peak Reflow Temperature-Max (s):

    30

MAX1558HETB+T Frequently Asked Questions (FAQs)

  • The recommended layout and placement for the MAX1558HETB+T involves keeping the input and output traces as short as possible, using a solid ground plane, and placing the device close to the power source. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and EMI.
  • The MAX1558HETB+T requires a single 3.3V or 5V power supply, and it's recommended to use a low-noise, low-dropout regulator to power the device. The power sequencing requirements involve powering up the device in the following order: GND, VCC, and then the input signals. It's also recommended to add decoupling capacitors close to the device to filter out noise and ripple.
  • The MAX1558HETB+T has an operating temperature range of -40°C to +125°C. The device's performance may be affected by temperature, with the output voltage and current capability decreasing at higher temperatures. It's recommended to derate the device's performance by 0.5% per °C above 25°C to ensure reliable operation.
  • To troubleshoot common issues with the MAX1558HETB+T, start by checking the input voltage and current, as well as the output voltage and current. Verify that the device is properly powered and that the input and output capacitors are correctly sized. Check for any signs of overheating, and ensure that the device is not operating in a current-limiting mode. If the issue persists, consult the datasheet and application notes for further troubleshooting guidance.
  • The MAX1558HETB+T has built-in ESD protection diodes on the input and output pins, which can withstand up to 2kV of ESD voltage. To prevent latch-up, it's recommended to use a series resistor on the input lines and to ensure that the input voltage does not exceed the maximum rating. Additionally, it's recommended to use a TVS diode on the input lines to protect against voltage transients.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX1558HETB+T Overview

Use the download button to access the MAX1558HETB+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX15, or try a keyword search, such as Peripheral Drivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX1558HETB+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑