Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX20327EWL+T - Analog Devices

Description: Analog Switch ICs Ultra Small Low Ron DPDT Analog Switch,1 Circuit IC Switch 1:1 350mOhm 9-WLP (1.61x1.61)

Download MAX20327EWL+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX20327EWL+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX20327EWL+T - Analog Devices PCB footprint - BGA - BGA - W91P1+1
click to zoom
3D Models
MAX20327EWL+T - Analog Devices - 3D model - BGA - W91P1+1
click to zoom

MAX20327EWL+T Details

  • Manufacturer Part Number:

    MAX20327EWL+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    9-WLCSP-N/A

  • Package Description:

    WLP-9

  • Pin Count:

    9

  • Manufacturer Package Code:

    9-WLCSP-N/A

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2018-09-13

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    8.5

  • Analog IC - Other Type:

    DPDT

  • JESD-30 Code:

    S-XBGA-B9

  • Length:

    1.607 mm

  • Moisture Sensitivity Level:

    1

  • Number of Channels:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    9

  • Off-state Isolation-Nom:

    60 dB

  • On-state Resistance Match-Nom:

    0.002 Ω

  • On-state Resistance-Max (Ron):

    0.5 Ω

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output:

    SEPARATE OUTPUT

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    VFBGA

  • Package Equivalence Code:

    BGA9,3X3,16

  • Package Shape:

    SQUARE

  • Package Style:

    GRID ARRAY, VERY THIN PROFILE, FINE PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Seated Height-Max:

    0.69 mm

  • Signal Current-Max:

    1.1 A

  • Supply Current-Max (Isup):

    0.09 mA

  • Supply Voltage-Max (Vsup):

    5.5 V

  • Supply Voltage-Min (Vsup):

    1.6 V

  • Supply Voltage-Nom (Vsup):

    2.5 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    30000 ns

  • Switch-on Time-Max:

    300000 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Terminal Finish:

    Tin/Silver/Copper/Nickel (Sn/Ag/Cu/Ni)

  • Terminal Form:

    BALL

  • Terminal Pitch:

    0.4 mm

  • Terminal Position:

    BOTTOM

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    1.607 mm

MAX20327EWL+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX20327EWL+T involves keeping the input and output traces short and separate, using a solid ground plane, and placing the device close to the power source. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • To ensure proper power-up and configuration, follow the recommended power-up sequence: apply VCC, then EN, and finally VIN. Also, make sure to configure the device according to the datasheet recommendations, including setting the correct output voltage and enabling/disabling the output as needed.
  • The MAX20327EWL+T has a maximum junction temperature of 150°C. To ensure reliable operation, ensure good airflow, use a heat sink if necessary, and avoid overheating the device. Also, consider using thermal interface materials and following proper PCB design guidelines to minimize thermal resistance.
  • To troubleshoot issues with the MAX20327EWL+T, start by verifying the input voltage, output voltage, and enable pin configurations. Check for proper PCB layout, decoupling, and thermal management. Use an oscilloscope to monitor the output voltage and input voltage waveforms. Consult the datasheet and application notes for guidance on troubleshooting specific issues.
  • To minimize EMI/EMC issues with the MAX20327EWL+T, follow proper PCB design guidelines, use shielding, and ensure good grounding. Keep the device away from noise sources, use ferrite beads or chokes to filter noise, and consider using EMI filters or common-mode chokes. Consult the datasheet and application notes for specific guidance on EMI/EMC considerations.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX20327EWL+T Overview

Use the download button to access the MAX20327EWL+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX20, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX20327EWL+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑