Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX3062EEKA+T - Analog Devices

Description: RS-422/RS-485 Interface IC +/-15kV ESD-Protected, Fail-Safe, 20Mbps, Slew-Rate-Limited RS-485/RS-422 Transceivers in a SOT

Download MAX3062EEKA+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX3062EEKA+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX3062EEKA+T - Analog Devices PCB footprint - SOT23 (8-Pin) - SOT23 (8-Pin) - K8F+4**-
click to zoom
3D Models
MAX3062EEKA+T - Analog Devices - 3D model - SOT23 (8-Pin) - K8F+4**-
click to zoom

MAX3062EEKA+T Details

  • Manufacturer Part Number:

    MAX3062EEKA+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOT_23-N/A

  • Package Description:

    SOT-23, 8 PIN

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOT_23-N/A

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2002-09-02

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    8.5

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000001 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485; TIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • Length:

    2.9 mm

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Low Current-Max:

    0.004 A

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Equivalence Code:

    TSSOP8,.1

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Receive Delay-Max:

    80 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.45 mm

  • Supply Current-Max:

    1.5 mA

  • Supply Voltage-Max:

    5.25 V

  • Supply Voltage-Min:

    4.75 V

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Transmit Delay-Max:

    30 ns

  • Width:

    1.625 mm

MAX3062EEKA+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX3062EEKA+T involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the signal sources. Additionally, using a shielded cable and minimizing the length of the cable can help reduce EMI and noise.
  • Proper termination for high-speed signals involves using a termination resistor that matches the impedance of the transmission line. For the MAX3062EEKA+T, a 50Ω termination resistor is recommended. Additionally, the termination resistor should be placed as close to the device as possible to minimize signal reflections.
  • The maximum cable length supported by the MAX3062EEKA+T depends on the specific application and the type of cable used. However, as a general rule, the maximum cable length should not exceed 10 meters to ensure reliable data transmission. It's also important to consider the signal attenuation and distortion caused by the cable.
  • The MAX3062EEKA+T can be configured for half-duplex or full-duplex operation by setting the appropriate pins. For half-duplex operation, the TXEN pin should be tied to the RXEN pin, while for full-duplex operation, the TXEN pin should be tied to VCC and the RXEN pin should be tied to GND. Consult the datasheet for more information on pin configurations.
  • The recommended power-up sequence for the MAX3062EEKA+T is to apply power to the VCC pin first, followed by the VEE pin. This ensures that the internal voltage regulators are properly initialized and that the device operates correctly.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX3062EEKA+T Overview

Use the download button to access the MAX3062EEKA+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX30, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX3062EEKA+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑