Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX3071EESA+ - Analog Devices

Description: MAX3071EESA+, Line Transceiver, RS-485, RS-422 250 kbit/s Differential, 3.3 V, 8-Pin SOIC

Download MAX3071EESA+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX3071EESA+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX3071EESA+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 8 SO-3
click to zoom
3D Models
MAX3071EESA+ - Analog Devices - 3D model - Small Outline Packages - 8 SO-3
click to zoom

MAX3071EESA+ Details

  • Manufacturer Part Number:

    MAX3071EESA+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOIC_N-150_MIL

  • Package Description:

    0.150 INCH, MS-012AA, SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOIC_N-150_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2002-11-22

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    8.5

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000001 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485; TIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.001 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    200 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    1.5 mA

  • Supply Voltage-Max:

    3.63 V

  • Supply Voltage-Min:

    2.97 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    3.63 V

  • Supply Voltage1-Min:

    2.97 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    1500 ns

  • Width:

    3.9 mm

MAX3071EESA+ Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX3071EESA+ involves keeping the signal traces short and away from noise sources, using a solid ground plane, and placing the device close to the signal source. A 4-layer PCB with a dedicated ground plane is recommended. Additionally, the device's exposed pad should be connected to a solid ground plane to improve thermal performance.
  • To ensure reliable operation of the MAX3071EESA+ in high-temperature environments, it is essential to provide adequate heat sinking, such as a thermal pad or heat sink, to keep the device junction temperature below 150°C. Additionally, the device should be operated within its specified temperature range, and the power supply should be stable and well-regulated.
  • The maximum cable length that can be driven by the MAX3071EESA+ depends on the specific application and the type of cable used. However, as a general rule, the device can drive up to 100 meters of Category 5e or Category 6 cable. It is recommended to use a cable with a characteristic impedance of 100 ohms and to follow the IEEE 802.3 standard for Ethernet cable specifications.
  • To troubleshoot common issues with the MAX3071EESA+, such as no link or intermittent link, start by checking the power supply and ensuring that it is stable and within the specified range. Next, verify that the device is properly configured and that the transmit and receive signals are properly connected. Check for any signs of physical damage or overheating, and ensure that the device is properly seated on the PCB. If the issue persists, try swapping the device with a known good one or checking the PCB layout for any potential issues.
  • When using the MAX3071EESA+ in a redundant or fault-tolerant system, key considerations include ensuring that the device is properly configured for redundant operation, using a suitable redundancy protocol, and providing adequate power supply redundancy. Additionally, the system should be designed to detect and respond to device failures, and the PCB layout should be designed to minimize the risk of common-mode failures.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX3071EESA+ Overview

Use the download button to access the MAX3071EESA+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX30, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX3071EESA+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX3071EESA+ Alternates

Showing results

Image Part Number Model
Part Image MAX3071EESA+T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
Part Image MAX3074EESA+ Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
Part Image MAX3071EESA+ Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
Part Image MAX3074EESA+T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
Part Image MAX3074EESA Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
For a full list of alternate parts for MAX3071EESA+, check out Findchips.com