Part Image

MAX3075EASA+ - Analog Devices

Description: Maxim MAX3075EASA+, Line Transceiver, EIA/TIA-485, 3.3 V, 8-Pin SOIC

Download MAX3075EASA+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MAX3075EASA+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - S8+4
click to zoom
3D Models
MAX3075EASA+ - Analog Devices  - 3D model - Small Outline Packages - S8+4
click to zoom

MAX3075EASA+ Details

  • Manufacturer Part Number:

    MAX3075EASA+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOIC_N-150_MIL

  • Package Description:

    0.150 INCH, MS-012AA, SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOIC_N-150_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2002-11-22

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    8.5

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000001 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485; TIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.001 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    200 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    1.5 mA

  • Supply Voltage-Max:

    3.63 V

  • Supply Voltage-Min:

    2.97 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    3.63 V

  • Supply Voltage1-Min:

    2.97 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    800 ns

  • Width:

    3.9 mm

MAX3075EASA+ Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX3075EASA+ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. A 4-layer PCB with a dedicated ground plane is recommended. Additionally, the device should be placed close to the capacitors to minimize parasitic inductance.
  • The MAX3075EASA+ requires proper termination to ensure signal integrity. The device has a 100Ω differential output impedance, so it should be terminated with a 100Ω differential load. The termination resistors should be placed as close to the device as possible to minimize reflections.
  • The maximum cable length supported by the MAX3075EASA+ depends on the specific application and the type of cable used. However, as a general rule, the device can support cable lengths up to 100 meters at a data rate of 100 Mbps. For longer cable lengths, repeaters or active cables may be required.
  • The MAX3075EASA+ has built-in hot-swap protection, which allows it to withstand the inrush current generated when a device is hot-swapped. However, to ensure reliable operation, it is recommended to add external protection circuitry, such as a current-limiting resistor and a TVS diode, to protect the device from overvoltage and overcurrent conditions.
  • The recommended power-up sequence for the MAX3075EASA+ is to power up the VCC supply first, followed by the VEE supply. This ensures that the internal biasing circuitry is properly established before the device becomes active.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX3075EASA+ Overview

Use the download button to access the MAX3075EASA+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX30, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX3075EASA+

Showing 0 results

MAX3075EASA+ Alternates

Showing results

Image Part Number Model
Part Image MAX3075EASA+T Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

Part Image MAX3075EASA+T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

Part Image MAX3075EASA Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

Part Image MAX3075EASA-T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8