Part Image

MAX307CWI+T - Analog Devices

Description: Multiplexer Switch ICs Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers

Download MAX307CWI+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MAX307CWI+T - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - MAX 28 Wide SO
click to zoom
3D Models
MAX307CWI+T - Analog Devices  - 3D model - Small Outline Packages - MAX 28 Wide SO
click to zoom

MAX307CWI+T Details

  • Manufacturer Part Number:

    MAX307CWI+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    28-SOIC_W-300_MIL

  • Package Description:

    SOP, SOP28,.4

  • Pin Count:

    28

  • Manufacturer Package Code:

    28-SOIC_W-300_MIL

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1994-08-12

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Analog IC - Other Type:

    DIFFERENTIAL MULTIPLEXER

  • JESD-30 Code:

    R-PDSO-G28

  • JESD-609 Code:

    e3

  • Length:

    17.9 mm

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage-Max (Vsup):

    -20 V

  • Neg Supply Voltage-Min (Vsup):

    -4.5 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Normal Position:

    NO

  • Number of Channels:

    8

  • Number of Functions:

    1

  • Number of Terminals:

    28

  • Off-state Isolation-Nom:

    69 dB

  • On-state Resistance Match-Nom:

    1.5 Ω

  • On-state Resistance-Max (Ron):

    100 Ω

  • Operating Temperature-Max:

    70 °C

  • Output:

    COMMON OUTPUT

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP28,.4

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    2.65 mm

  • Signal Current-Max:

    0.03 A

  • Supply Current-Max (Isup):

    1 mA

  • Supply Voltage-Max (Vsup):

    20 V

  • Supply Voltage-Min (Vsup):

    4.5 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    150 ns

  • Switch-on Time-Max:

    200 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    7.5 mm

MAX307CWI+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX307CWI+T involves keeping the signal traces short and away from noise sources, using a solid ground plane, and placing the device close to the signal source. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and EMI.
  • To ensure proper termination for high-speed signals, use a 50Ω termination resistor at the receiver end, and make sure the transmission line is properly matched to the 50Ω impedance. Additionally, use a series termination resistor at the transmitter end to reduce reflections and improve signal integrity.
  • The maximum cable length supported by the MAX307CWI+T depends on the specific application and the type of cable used. However, as a general rule, the MAX307CWI+T can support cable lengths up to 100 meters at data rates up to 100 Mbps. For longer cable lengths or higher data rates, it's recommended to use repeaters or active cables to maintain signal integrity.
  • The MAX307CWI+T can be configured for half-duplex or full-duplex operation by controlling the TXEN and RXEN pins. For half-duplex operation, tie TXEN and RXEN together and connect them to a single control signal. For full-duplex operation, connect TXEN and RXEN to separate control signals to enable simultaneous transmission and reception.
  • The recommended power-up sequence for the MAX307CWI+T is to apply power to the VCC pin first, followed by the VEE pin. This ensures that the internal voltage regulators are properly initialized and that the device powers up correctly.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX307CWI+T Overview

Use the download button to access the MAX307CWI+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX30, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX307CWI+T

Showing 0 results

MAX307CWI+T Alternates

Showing results

Image Part Number Model
Part Image MAX307CWI+ Maxim Integrated Products

Differential Multiplexer, 1 Func, 8 Channel, CMOS, PDSO28

Part Image MAX307EWI+T Maxim Integrated Products

Differential Multiplexer, 1 Func, 8 Channel, CMOS, PDSO28

Part Image MAX307EWI Maxim Integrated Products

Differential Multiplexer, 1 Func, 8 Channel, CMOS, PDSO28

Part Image MAX307CWI Maxim Integrated Products

Differential Multiplexer, 1 Func, 8 Channel, CMOS, PDSO28

Part Image MAX307EWI-T Maxim Integrated Products

Differential Multiplexer, 1 Func, 8 Channel, CMOS, PDSO28

For a full list of alternate parts for MAX307CWI+T, check out Findchips.com