Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX3088EESA+ - Analog Devices

Description: MAX3088EESA+, Line Transceiver, EIA/TIA-485, RS-485, RS-422 10Mbit/s Differential, 4.75 → 5.25 V, 8-Pin SOIC

Download MAX3088EESA+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX3088EESA+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX3088EESA+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - S8+5
click to zoom
3D Models
MAX3088EESA+ - Analog Devices - 3D model - Small Outline Packages - S8+5
click to zoom

MAX3088EESA+ Details

  • Manufacturer Part Number:

    MAX3088EESA+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOIC_N-150_MIL

  • Package Description:

    SO-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOIC_N-150_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2000-11-07

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    2 V

  • Output Low Current-Max:

    0.004 A

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    150 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    1 mA

  • Supply Voltage-Max:

    5.25 V

  • Supply Voltage-Min:

    4.75 V

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    60 ns

  • Width:

    3.9 mm

MAX3088EESA+ Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX3088EESA+ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. A 4-layer PCB with a dedicated ground plane is recommended. Additionally, the device should be placed close to the capacitors to minimize parasitic inductance.
  • Proper termination of the MAX3088EESA+ involves connecting a 50Ω resistor in series with the transmission line and a 50Ω load termination at the receiving end. The device also requires a 0.1μF capacitor between the VCC and GND pins for proper operation.
  • The maximum cable length supported by the MAX3088EESA+ depends on the specific application and the type of cable used. However, as a general rule, the device can support cable lengths up to 100 meters at data rates up to 100Mbps. For longer cable lengths, repeaters or active cables may be required.
  • Common issues with the MAX3088EESA+ include signal integrity problems, incorrect termination, and power supply noise. To troubleshoot these issues, use an oscilloscope to check the signal quality, verify the termination resistors, and ensure the power supply is clean and stable. Additionally, check the device's operating temperature and ensure it is within the recommended range.
  • Yes, the MAX3088EESA+ can be used in a hot-swap application, but it requires additional circuitry to ensure the device is properly powered down before the hot-swap event. This can be achieved using a power-switching device, such as a MOSFET, to disconnect the power supply from the device during the hot-swap event.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX3088EESA+ Overview

Use the download button to access the MAX3088EESA+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX30, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX3088EESA+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX3088EESA+ Alternates

Showing results

Image Part Number Model
Part Image MAX3088EESA+T Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8
Part Image MAX3088ECSA+T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8
Part Image MAX3088EESA+T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8
Part Image MAX3088EESA-T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8
Part Image MAX3088ECSA Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8
For a full list of alternate parts for MAX3088EESA+, check out Findchips.com