Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX338CSE+ - Analog Devices

Description: Maxim MAX338CSE+, Multiplexer Switch IC Single 8 x 1, 12 V, 16-Pin SOIC

Download MAX338CSE+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX338CSE+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX338CSE+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 16 Narrow SO
click to zoom
3D Models
MAX338CSE+ - Analog Devices - 3D model - Small Outline Packages - 16 Narrow SO
click to zoom

MAX338CSE+ Details

  • Manufacturer Part Number:

    MAX338CSE+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    16-SOIC_N-150_MIL

  • Package Description:

    SOIC-16

  • Pin Count:

    16

  • Manufacturer Package Code:

    16-SOIC_N-150_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1999-05-25

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Analog IC - Other Type:

    SINGLE-ENDED MULTIPLEXER

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e3

  • Length:

    9.9 mm

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage-Max (Vsup):

    -20 V

  • Neg Supply Voltage-Min (Vsup):

    -4.5 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Normal Position:

    NO

  • Number of Channels:

    8

  • Number of Functions:

    1

  • Number of Terminals:

    16

  • Off-state Isolation-Nom:

    75 dB

  • On-state Resistance Match-Nom:

    4 Ω

  • On-state Resistance-Max (Ron):

    400 Ω

  • Operating Temperature-Max:

    70 °C

  • Output:

    COMMON OUTPUT

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP16,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Signal Current-Max:

    0.03 A

  • Supply Current-Max (Isup):

    0.6 mA

  • Supply Voltage-Max (Vsup):

    20 V

  • Supply Voltage-Min (Vsup):

    4.5 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    500 ns

  • Switch-on Time-Max:

    500 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.9 mm

MAX338CSE+ Frequently Asked Questions (FAQs)

  • A good layout and routing practice for the MAX338CSE+ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the IC and the capacitors. Additionally, it's recommended to use a shielded cable for the RS-485 bus and to keep the bus away from noisy signals.
  • To ensure reliable operation in a noisy industrial environment, it's recommended to use a common-mode choke on the RS-485 bus, add TVS diodes for ESD protection, and use a shielded enclosure for the circuit board. Additionally, consider using a redundant system design and implementing error detection and correction mechanisms in the communication protocol.
  • The maximum cable length supported by the MAX338CSE+ depends on the data rate and the type of cable used. As a general rule, the maximum cable length is 4000 feet (1219 meters) at a data rate of 10 Mbps, and 1000 feet (305 meters) at a data rate of 100 Mbps. However, it's recommended to consult the cable manufacturer's specifications and perform tests to determine the maximum cable length for a specific application.
  • To troubleshoot communication issues with the MAX338CSE+, start by checking the power supply and ground connections, then verify the RS-485 bus termination and the cable connections. Use an oscilloscope to check the signal integrity and look for signs of noise or distortion. Also, check the communication protocol and the firmware implementation to ensure that they are correct and compatible with the MAX338CSE+.
  • Yes, the MAX338CSE+ can be used in a multi-drop configuration, but it's recommended to use a repeater or a hub to extend the bus length and improve signal integrity. Additionally, ensure that the total bus capacitance does not exceed the maximum recommended value, and that the devices on the bus are properly terminated.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX338CSE+ Overview

Use the download button to access the MAX338CSE+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX33, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX338CSE+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX338CSE+ Alternates

Showing results

Image Part Number Model
Part Image MAX338ESE+ Maxim Integrated Products

Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO16
Part Image MAX338ESE+T Maxim Integrated Products

Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO16
Part Image MAX338CSE+ Maxim Integrated Products

Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO16
Part Image MAX338CSE Maxim Integrated Products

Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO16
Part Image MAX338CSE-T Maxim Integrated Products

Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO16
For a full list of alternate parts for MAX338CSE+, check out Findchips.com