Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX3483AEASA+ - Analog Devices

Description: Maxim MAX3483AEASA+, Line Transceiver, 1993/ RS-485, EIA RS-422, 3 → 3.6 V, 8-Pin SOIC

Download MAX3483AEASA+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX3483AEASA+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX3483AEASA+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - soic8-ren3
click to zoom
3D Models
MAX3483AEASA+ - Analog Devices - 3D model - Small Outline Packages - soic8-ren3
click to zoom

MAX3483AEASA+ Details

  • Manufacturer Part Number:

    MAX3483AEASA+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOIC_N-150_MIL

  • Package Description:

    SOP-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOIC_N-150_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2016-09-19

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000002 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; TIA-422; EIA-485; TIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Low Current-Max:

    0.002 A

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Receive Delay-Max:

    200 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    4 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    1000 ns

  • Width:

    3.9 mm

MAX3483AEASA+ Frequently Asked Questions (FAQs)

  • A good layout and routing practice for the MAX3483AEASA+ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. Additionally, it's recommended to use a shielded cable for the RS-485 bus and to keep the cable away from noise sources.
  • To ensure reliable communication in a noisy industrial environment, use a shielded cable, twisted pair wiring, and implement error-checking mechanisms such as CRC or checksum in the communication protocol. Additionally, consider using a common-mode choke or a ferrite bead to filter out high-frequency noise.
  • The maximum cable length supported by the MAX3483AEASA+ depends on the baud rate and the cable characteristics. As a general rule, the maximum cable length is approximately 1000 feet (305 meters) at 9600bps and 400 feet (122 meters) at 115.2kbps. However, it's recommended to consult the RS-485 specification and perform tests to determine the maximum cable length for a specific application.
  • The MAX3483AEASA+ can be configured for half-duplex or full-duplex operation by controlling the DE (driver enable) and RE (receiver enable) pins. For half-duplex operation, tie the DE pin to the RE pin, and for full-duplex operation, use separate control signals for the DE and RE pins.
  • The recommended termination scheme for the RS-485 bus using the MAX3483AEASA+ involves using a 120Ω termination resistor at each end of the bus, and a biasing network to maintain a high impedance when the bus is idle. The biasing network typically consists of a 560Ω resistor to VCC and a 560Ω resistor to GND.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX3483AEASA+ Overview

Use the download button to access the MAX3483AEASA+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX34, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX3483AEASA+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑