Part Image

MAX4326ESA+ - Analog Devices

Description: MAX4326ESA+, Dual Operational Amplifier Low Power 5MHz Rail-Rail, 2.4 → 6.5 V, 8-Pin SO

Download MAX4326ESA+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MAX4326ESA+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 8 pin umax
click to zoom
3D Models
MAX4326ESA+ - Analog Devices  - 3D model - Small Outline Packages - 8 pin umax
click to zoom

MAX4326ESA+ Details

  • Manufacturer Part Number:

    MAX4326ESA+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOIC_N-150_MIL

  • Package Description:

    0.150 INCH, SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOIC_N-150_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Date Of Intro:

    1998-05-23

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.18 µA

  • Bias Current-Max (IIB) @25C:

    0.15 µA

  • Common-mode Reject Ratio-Min:

    62 dB

  • Common-mode Reject Ratio-Nom:

    94 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    3000 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Low-Bias:

    NO

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    2

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Nom:

    2 V/us

  • Supply Current-Max:

    2.4 mA

  • Supply Voltage Limit-Max:

    7.5 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    5000

  • Voltage Gain-Min:

    1990

  • Wideband:

    NO

  • Width:

    3.9 mm

MAX4326ESA+ Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX4326ESA+ involves keeping the input and output traces separate, using a solid ground plane, and placing the device close to the signal source. Additionally, use a low-ESR capacitor for the power supply bypassing and keep the power supply traces away from the signal traces.
  • Verify that the supply voltage (VCC) is within the recommended range of 2.7V to 5.5V, and the operating temperature is between -40°C to +125°C. Also, ensure that the input signals are within the recommended common-mode voltage range and that the output current does not exceed the maximum rating.
  • The maximum allowable input voltage for the MAX4326ESA+ is 6V, which is the absolute maximum rating. However, for normal operation, the input voltage should be within the recommended common-mode voltage range of VCC - 1.5V to VCC + 0.5V.
  • Yes, the MAX4326ESA+ can be used as a unity-gain buffer amplifier. However, it's essential to ensure that the input impedance is matched to the source impedance, and the output is properly terminated to prevent oscillations.
  • The output impedance of the MAX4326ESA+ can be calculated using the equation: Zout = R_out * (1 + (R_f / R_g)), where R_out is the output resistance, R_f is the feedback resistance, and R_g is the gain resistance. The typical output impedance is around 75 ohms.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX4326ESA+ Overview

Use the download button to access the MAX4326ESA+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX43, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX4326ESA+

Showing 0 results

MAX4326ESA+ Alternates

Showing results

Image Part Number Model
Part Image MAX4326ESA+T Analog Devices Inc

Operational Amplifier, 2 Func, 3000uV Offset-Max, BIPolar, PDSO8

Part Image MAX4326ESA Rochester Electronics LLC

DUAL OP-AMP, 3000uV OFFSET-MAX, 5MHz BAND WIDTH, PDSO8, 0.150 INCH, SOIC-8

Part Image MAX4326ESA+T Maxim Integrated Products

Operational Amplifier, 2 Func, 3000uV Offset-Max, BIPolar, PDSO8

Part Image MAX4326ESA Maxim Integrated Products

Operational Amplifier, 2 Func, 3000uV Offset-Max, BIPolar, PDSO8

Part Image MAX4326ESA-T Maxim Integrated Products

Operational Amplifier, 2 Func, 3000uV Offset-Max, BIPolar, PDSO8, 0.150 INCH, SOIC-8

For a full list of alternate parts for MAX4326ESA+, check out Findchips.com