Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX4472ESD+ - Analog Devices

Description: Maxim MAX4472ESD+, Quad Micropower Op Amp, 9kHz Rail-Rail, 1.8 → 5.5 V, 14-Pin SOIC

Download MAX4472ESD+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX4472ESD+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX4472ESD+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 14 SO
click to zoom
3D Models
MAX4472ESD+ - Analog Devices - 3D model - Small Outline Packages - 14 SO
click to zoom

MAX4472ESD+ Details

  • Manufacturer Part Number:

    MAX4472ESD+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    14-SOIC_N-150_MIL

  • Package Description:

    0.150 INCH, ROHS COMPLIANT, MS-012AB, SOIC-14

  • Pin Count:

    14

  • Manufacturer Package Code:

    14-SOIC_N-150_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Date Of Intro:

    2001-10-23

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.00425 µA

  • Bias Current-Max (IIB) @25C:

    0.0015 µA

  • Common-mode Reject Ratio-Nom:

    95 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    15000 µV

  • JESD-30 Code:

    R-PDSO-G14

  • JESD-609 Code:

    e3

  • Length:

    8.65 mm

  • Low-Bias:

    NO

  • Low-Offset:

    NO

  • Micropower:

    YES

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    4

  • Number of Terminals:

    14

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP14,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Nom:

    2000 V/us

  • Supply Current-Max:

    0.006 mA

  • Supply Voltage Limit-Max:

    6 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    9

  • Voltage Gain-Min:

    5600

  • Wideband:

    NO

  • Width:

    3.9 mm

MAX4472ESD+ Frequently Asked Questions (FAQs)

  • The MAX4472ESD+ is a high-impedance device, so it's essential to keep the input traces as short as possible and away from noise sources. Use a ground plane under the device, and keep the input and output traces separate to minimize crosstalk. Also, place the device close to the signal source to reduce noise pickup.
  • The MAX4472ESD+ has a specific power-up sequence requirement. Apply VCC first, followed by the input signal. Ensure that the input signal is within the specified range before applying VCC. Also, avoid applying the input signal before VCC is stable, as this can cause incorrect operation or damage to the device.
  • The MAX4472ESD+ can drive a maximum capacitive load of 100pF. Exceeding this limit can cause the output signal to oscillate or become distorted. To ensure stable operation, use a buffer or an op-amp with a low output impedance to drive capacitive loads greater than 100pF.
  • The MAX4472ESD+ has built-in overvoltage protection (OVP) that limits the input voltage to 6V. If the input voltage exceeds 6V, the device will enter a high-impedance state to prevent damage. However, it's still recommended to use external protection circuitry, such as a voltage limiter or a TVS diode, to protect the device from excessive voltage transients.
  • The typical settling time for the MAX4472ESD+ is around 10μs. This settling time can affect the overall system performance, especially in applications that require fast signal acquisition or high-speed data conversion. To minimize the impact of settling time, ensure that the input signal is stable and within the specified range before taking measurements or performing data conversions.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX4472ESD+ Overview

Use the download button to access the MAX4472ESD+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX44, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX4472ESD+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX4472ESD+ Alternates

Showing results

Image Part Number Model
Part Image MAX4472ESD+T Maxim Integrated Products

Operational Amplifier, 4 Func, 15000uV Offset-Max, BICMOS, PDSO14
Part Image MAX4472ESD Maxim Integrated Products

Operational Amplifier, 4 Func, 15000uV Offset-Max, BICMOS, PDSO14
Part Image MAX4472ESD-T Maxim Integrated Products

Operational Amplifier, 4 Func, 15000uV Offset-Max, BICMOS, PDSO14, 0.150 INCH, MS-012AB, SOIC-14