Part Image

MAX481CSA+T - Analog Devices

Description: MAXIM INTEGRATED / ANALOG DEVICES - MAX481CSA+T - Transceiver RS422, RS485, 4.75V-5.25V supply, 1 Driver, NSOIC-8

Download MAX481CSA+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MAX481CSA+T - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - S8+2
click to zoom
3D Models
MAX481CSA+T - Analog Devices  - 3D model - Small Outline Packages - S8+2
click to zoom

MAX481CSA+T Details

  • Manufacturer Part Number:

    MAX481CSA+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOIC_N-150_MIL

  • Package Description:

    SOP, SOP8,.25

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOIC_N-150_MIL

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2000-01-13

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Additional Feature:

    COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.001 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.004 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    200 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    0.9 mA

  • Supply Voltage-Max:

    5.25 V

  • Supply Voltage-Min:

    4.75 V

  • Supply Voltage-Nom:

    5 V

  • Supply Voltage1-Max:

    5.25 V

  • Supply Voltage1-Min:

    4.75 V

  • Supply Voltage1-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    60 ns

  • Width:

    3.9 mm

MAX481CSA+T Frequently Asked Questions (FAQs)

  • A good layout and routing practice for the MAX481CSA+T is to keep the transmitter and receiver sections separate, use a ground plane, and keep the signal traces short and away from noise sources. Additionally, use a common-mode choke or ferrite bead to filter out high-frequency noise.
  • To ensure reliable communication over long cables, use a cable with a characteristic impedance of 120Ω, keep the cable length as short as possible, and use a termination resistor at the receiving end. Also, consider using a repeater or a line driver to boost the signal.
  • The maximum cable length supported by the MAX481CSA+T depends on the data rate and the cable characteristics. As a general rule, the maximum cable length is around 1000 feet (305 meters) at a data rate of 250 kbps. However, this can be extended to several kilometers using repeaters or line drivers.
  • To protect the MAX481CSA+T from ESD, use ESD protection devices such as TVS diodes or ESD arrays on the input and output lines. Also, follow proper handling and storage procedures to prevent ESD damage.
  • The power-up sequence for the MAX481CSA+T is to first apply the power supply voltage (VCC) and then enable the transmitter and receiver sections. The power-down sequence is the reverse of this.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX481CSA+T Overview

Use the download button to access the MAX481CSA+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX48, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX481CSA+T

Showing 0 results

MAX481CSA+T Alternates

Showing results

Image Part Number Model
Part Image MAX3082ECSA+T Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8

Part Image MAX481ECSA+ Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8

Part Image MAX1487ECSA+T Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8

Part Image TL3695DE4 Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, TTL, PDSO8

Part Image THVD1419D Texas Instruments

Line Transceiver

For a full list of alternate parts for MAX481CSA+T, check out Findchips.com