Part Image

MAX483CPA+ - Analog Devices

Description: MAX483CPA+, Line Transceiver, RS-485, RS-422 Differential, 5 V, 8-Pin PDIP

Download MAX483CPA+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MAX483CPA+ - Analog Devices PCB footprint - Dual-In-Line Packages - Dual-In-Line Packages - 8 pdip_1
click to zoom
3D Models
MAX483CPA+ - Analog Devices  - 3D model - Dual-In-Line Packages - 8 pdip_1
click to zoom

MAX483CPA+ Details

  • Manufacturer Part Number:

    MAX483CPA+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-PDIP-300_MIL

  • Package Description:

    PLASTIC, DIP-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-PDIP-300_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2000-01-13

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Additional Feature:

    1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.001 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    R-PDIP-T8

  • JESD-609 Code:

    e3

  • Length:

    9.375 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.004 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    DIP

  • Package Equivalence Code:

    DIP8,.3

  • Package Shape:

    RECTANGULAR

  • Package Style:

    IN-LINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    2000 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    4.572 mm

  • Supply Current-Max:

    0.65 mA

  • Supply Voltage-Max:

    5.25 V

  • Supply Voltage-Min:

    4.75 V

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    NO

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    THROUGH-HOLE

  • Terminal Pitch:

    2.54 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    2000 ns

  • Width:

    7.62 mm

MAX483CPA+ Frequently Asked Questions (FAQs)

  • A good layout and routing practice for the MAX483CPA+ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the power supply. Additionally, it's recommended to use a shielded cable for the RS-485 bus and to keep the cable away from noise sources.
  • To ensure reliable communication in a noisy industrial environment, use a shielded cable, twisted pair wiring, and implement error detection and correction mechanisms such as CRC or checksum. Additionally, consider using a common-mode choke or ferrite bead to filter out high-frequency noise.
  • The maximum cable length supported by the MAX483CPA+ depends on the data rate, cable characteristics, and noise environment. As a general guideline, the maximum cable length is approximately 4000 feet (1219 meters) at 115.2 kbps, but it's recommended to consult the datasheet and perform testing to determine the maximum cable length for a specific application.
  • The MAX483CPA+ can be configured for half-duplex or full-duplex operation by connecting the DE (driver enable) and RE (receiver enable) pins accordingly. For half-duplex operation, connect DE to RE, and for full-duplex operation, connect DE to VCC and RE to GND.
  • The recommended termination scheme for the RS-485 bus using the MAX483CPA+ is to use a 120-ohm termination resistor at each end of the bus, with the resistors connected between the A and B lines. This helps to reduce reflections and improve signal integrity.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX483CPA+ Overview

Use the download button to access the MAX483CPA+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX48, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX483CPA+

Showing 0 results

MAX483CPA+ Alternates

Showing results

Image Part Number Model
Part Image MAX483EEPA Rochester Electronics LLC

LINE TRANSCEIVER, PDIP8, 0.300 INCH, PLASTIC, MS-001AB, DIP-8

Part Image MAX483EPA Rochester Electronics LLC

LINE TRANSCEIVER, PDIP8, PLASTIC, DIP-8

Part Image MAX483CPA+ Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDIP8

Part Image SP483ES Sipex Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDIP8

Part Image MAX483CPA Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDIP8

For a full list of alternate parts for MAX483CPA+, check out Findchips.com