Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX488EEPA+ - Analog Devices

Description: Maxim MAX488EEPA+, Line Transceiver, RS-485, 4.75 → 5.25 V, 8-Pin PDIP

Download MAX488EEPA+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX488EEPA+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX488EEPA+ - Analog Devices PCB footprint - Dual-In-Line Packages - Dual-In-Line Packages - P8+2-1
click to zoom
3D Models
MAX488EEPA+ - Analog Devices - 3D model - Dual-In-Line Packages - P8+2-1
click to zoom

MAX488EEPA+ Details

  • Manufacturer Part Number:

    MAX488EEPA+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-PDIP-300_MIL

  • Package Description:

    0.300 INCH, LEAD FREE, PLASTIC, MS-001AB, DIP-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-PDIP-300_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1995-09-23

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000002 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    R-PDIP-T8

  • JESD-609 Code:

    e3

  • Length:

    9.375 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    TOTEM-POLE

  • Output Low Current-Max:

    0.004 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    DIP

  • Package Equivalence Code:

    DIP8,.3

  • Package Shape:

    RECTANGULAR

  • Package Style:

    IN-LINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    2000 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    4.572 mm

  • Supply Current-Max:

    0.25 mA

  • Supply Voltage-Max:

    5.25 V

  • Supply Voltage-Min:

    4.75 V

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    NO

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    THROUGH-HOLE

  • Terminal Pitch:

    2.54 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    2000 ns

  • Width:

    7.62 mm

MAX488EEPA+ Frequently Asked Questions (FAQs)

  • The recommended PCB layout for the MAX488EEPA+ is to keep the input and output traces as short as possible, and to use a ground plane to reduce noise and EMI. Additionally, it's recommended to use a 0.1uF bypass capacitor between the VCC pin and GND pin to filter out noise.
  • To ensure reliable operation of the MAX488EEPA+ in high-temperature environments, it's recommended to follow proper thermal management practices, such as providing adequate heat sinking and airflow. Additionally, the device should be operated within its specified temperature range (-40°C to +125°C) and the power dissipation should be kept within the specified limits.
  • The maximum cable length that can be used with the MAX488EEPA+ depends on the specific application and the type of cable used. However, as a general rule, the cable length should be kept as short as possible to minimize signal attenuation and noise. A good starting point is to use a cable length of 1-2 meters, and to use a cable with a characteristic impedance of 100-120 ohms.
  • Yes, the MAX488EEPA+ can be used in a multi-point bus configuration. However, it's recommended to use a repeater or a bus buffer to ensure reliable operation and to prevent signal degradation. Additionally, the total bus length and the number of nodes should be limited to prevent signal attenuation and noise.
  • Common issues with the MAX488EEPA+ include signal integrity issues, noise, and faulty operation. To troubleshoot these issues, it's recommended to use a logic analyzer or an oscilloscope to monitor the signal waveforms and to check for any signs of noise or distortion. Additionally, the device should be checked for proper power supply and ground connections, and the PCB layout should be reviewed for any potential issues.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX488EEPA+ Overview

Use the download button to access the MAX488EEPA+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX48, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX488EEPA+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX488EEPA+ Alternates

Showing results

Image Part Number Model
Part Image MAX488EPA+ Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDIP8
Part Image MAX488CPA+ Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDIP8
Part Image MAX488ECPA Rochester Electronics LLC

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDIP8
Part Image MAX488EPA Rochester Electronics LLC

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDIP8
Part Image MAX488EPA Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDIP8
For a full list of alternate parts for MAX488EEPA+, check out Findchips.com