Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX96716AGTM/VY+T - Analog Devices

Description: Serializers & Deserializers - Serdes Dual, tunneling 6Gbps Dual CSI-2 GMSL2/G

Download MAX96716AGTM/VY+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX96716AGTM/VY+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX96716AGTM/VY+T - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - T4877Y+11
click to zoom
3D Models
MAX96716AGTM/VY+T - Analog Devices - 3D model - Quad Flat No-Lead - T4877Y+11
click to zoom

MAX96716AGTM/VY+T Details

  • Manufacturer Part Number:

    MAX96716AGTM/VY+T

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    TQFN-48

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Differential Output:

    NO

  • High Level Input Current-Max:

    0.000006 A

  • Input Characteristics:

    DIFFERENTIAL

  • Interface IC Type:

    DESERIALIZER

  • Interface Standard:

    GENERAL PURPOSE

  • JESD-30 Code:

    S-XQCC-N48

  • Length:

    7 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    2

  • Number of Terminals:

    48

  • Operating Temperature-Max:

    105 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    0.38 V

  • Output Characteristics:

    OPEN-DRAIN

  • Output Low Current-Max:

    0.004 A

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC48,.27SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Packing Method:

    TR, 13 INCH

  • Peak Reflow Temperature (Cel):

    260

  • Receiver Number of Bits:

    2

  • Screening Level:

    AEC-Q100; ISO 26262-ASIL B

  • Seated Height-Max:

    0.8 mm

  • Supply Current-Max:

    485 mA

  • Supply Voltage-Max:

    1.9 V

  • Supply Voltage-Min:

    1.71 V

  • Supply Voltage-Nom:

    1.8 V

  • Surface Mount:

    YES

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    7 mm

MAX96716AGTM/VY+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX96716AGTM/VY+T involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated layer for the analog signals, and to keep the signal traces short and direct.
  • The MAX96716AGTM/VY+T requires configuration through the I2C interface to set the desired camera module settings, such as the clock frequency, data format, and gain control. The specific configuration will depend on the camera module being used, and the recommended settings can usually be found in the camera module's datasheet or application notes.
  • The maximum cable length supported by the MAX96716AGTM/VY+T depends on the specific application and the type of cable used. In general, the device can support cable lengths of up to 10 meters at a data rate of 1 Gbps, but this may vary depending on the specific use case and the quality of the cable.
  • Troubleshooting issues with the MAX96716AGTM/VY+T typically involves using oscilloscopes and logic analyzers to analyze the signal quality and data transmission. It's also recommended to check the device's configuration and settings, as well as the quality of the power supply and the PCB layout. Additionally, Analog Devices provides a range of evaluation boards and software tools that can be used to debug and test the device.
  • Yes, the MAX96716AGTM/VY+T is AEC-Q100 qualified and is suitable for use in automotive applications, including advanced driver-assistance systems (ADAS) and autonomous vehicles. However, it's recommended to consult with Analog Devices' automotive support team to ensure that the device meets the specific requirements of the application.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX96716AGTM/VY+T Overview

Use the download button to access the MAX96716AGTM/VY+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX96, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX96716AGTM/VY+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑