Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX96724RGTN/V+T - Analog Devices

Description: Quad Tunneling GMSL2/1 to CSI-2 Deserializer Ordering Information

Download MAX96724RGTN/V+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX96724RGTN/V+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX96724RGTN/V+T - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - T5688+6C
click to zoom
3D Models
MAX96724RGTN/V+T - Analog Devices - 3D model - Quad Flat No-Lead - T5688+6C
click to zoom

MAX96724RGTN/V+T Details

  • Manufacturer Part Number:

    MAX96724RGTN/V+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    56-LFCSP-8X8X0.75

  • Package Description:

    TQFN-56

  • Pin Count:

    56

  • Manufacturer Package Code:

    56-LFCSP-8X8X0.75

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2023-03-20

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    8.5

  • Differential Output:

    YES

  • Interface IC Type:

    LINE RECEIVER

  • Interface Standard:

    GENERAL PURPOSE

  • JESD-30 Code:

    S-PQCC-N56

  • Length:

    8 mm

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    4

  • Number of Terminals:

    56

  • Operating Temperature-Max:

    105 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    0.38 V

  • Output Characteristics:

    OPEN-DRAIN

  • Output Low Current-Max:

    0.004 A

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HWQCCN

  • Package Equivalence Code:

    LCC56,.32SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY VERY THIN PROFILE

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Receiver Number of Bits:

    4

  • Screening Level:

    AEC-Q100

  • Seated Height-Max:

    0.8 mm

  • Supply Current-Max:

    725 mA

  • Supply Voltage-Max:

    1.9 V

  • Supply Voltage-Min:

    1.7 V

  • Supply Voltage-Nom:

    1.8 V

  • Surface Mount:

    YES

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    8 mm

MAX96724RGTN/V+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX96724RGTN/V+T involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated layer for the analog signals, and to keep the signal traces short and direct.
  • The MAX96724RGTN/V+T requires a single 3.3V power supply, and it's recommended to use a low-dropout linear regulator (LDO) to power the device. The power sequencing requirements are critical, and it's recommended to power up the device in the following order: VCC, then AVCC, and finally DVCC.
  • The maximum cable length supported by the MAX96724RGTN/V+T depends on the specific application and the type of cable used. However, as a general rule, the device can support cable lengths up to 10 meters at 1 Gbps and 5 meters at 2 Gbps. Signal integrity can be affected by the cable length, and it's recommended to use high-quality cables with proper termination to minimize signal degradation.
  • The MAX96724RGTN/V+T can be configured for different data rates by adjusting the internal clock frequency and the transmitter equalization settings. However, increasing the data rate can result in higher power consumption and reduced signal integrity. It's recommended to consult the datasheet and application notes for specific configuration guidelines and trade-offs.
  • The MAX96724RGTN/V+T has a maximum junction temperature of 150°C, and it's recommended to ensure that the device operates within a safe temperature range to prevent thermal shutdown. This can be achieved by using a heat sink, improving air flow, and reducing power consumption. It's also recommended to monitor the device temperature using the built-in thermal monitoring feature.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX96724RGTN/V+T Overview

Use the download button to access the MAX96724RGTN/V+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX96, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX96724RGTN/V+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑