The recommended PCB layout involves placing the MBR10200CT near the power input, using a solid ground plane, and keeping the input and output traces separate. For thermal management, a heat sink with a thermal resistance of 10°C/W or lower is recommended, and the device should be mounted on a multi-layer PCB with a thermal via to dissipate heat effectively.
To ensure proper biasing, the MBR10200CT requires a stable input voltage (Vin) between 10V and 20V, and a bias voltage (Vbias) between 4.5V and 5.5V. The bias voltage should be decoupled with a 10nF capacitor to ground, and the input voltage should be filtered with a 10uF capacitor to ground.
The maximum allowable ripple voltage on the input (Vin) is 1Vp-p, and on the output (Vout) is 50mVp-p. Exceeding these limits may affect the device's performance and reliability.
To protect the MBR10200CT, it is recommended to use a voltage regulator with overvoltage protection (OVP) and overcurrent protection (OCP) on the input side. Additionally, a fuse or a current-limiting resistor can be used to prevent excessive current draw.
The MBR10200CT should be stored in a dry, cool place, away from direct sunlight and moisture. It should be handled with anti-static precautions, such as using an anti-static wrist strap or mat, to prevent electrostatic discharge (ESD) damage.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MBR10200CT Overview
Use the download button to access the MBR10200CT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MBR10,
or try a keyword search, such as Rectifier Diodes
