CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE
Differential Output:
YES
Driver Number of Bits:
1
Input Characteristics:
DIFFERENTIAL
Interface IC Type:
LINE TRANSCEIVER
Interface Standard:
GENERAL PURPOSE
JESD-30 Code:
S-PDSO-G8
JESD-609 Code:
e3
Length:
3 mm
Moisture Sensitivity Level:
3
Number of Functions:
1
Number of Terminals:
8
Operating Temperature-Max:
85 °C
Operating Temperature-Min:
-40 °C
Package Body Material:
PLASTIC/EPOXY
Package Code:
TSSOP
Package Equivalence Code:
TSSOP8,.19
Package Shape:
SQUARE
Package Style:
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Cel):
260
Qualification Status:
Not Qualified
Receive Delay-Max:
0.3 ns
Receiver Number of Bits:
1
Seated Height-Max:
1.1 mm
Supply Current-Max:
39 mA
Supply Voltage-Max:
5.5 V
Supply Voltage-Min:
3 V
Supply Voltage-Nom:
3.3 V
Surface Mount:
YES
Technology:
ECL
Temperature Grade:
INDUSTRIAL
Terminal Finish:
MATTE TIN
Terminal Form:
GULL WING
Terminal Pitch:
0.65 mm
Terminal Position:
DUAL
Time@Peak Reflow Temperature-Max (s):
30
Transmit Delay-Max:
0.3 ns
Width:
3 mm
MC100EP16TDTG Frequently Asked Questions (FAQs)
A good PCB layout for the MC100EP16TDTG involves keeping the signal traces short and away from noise sources, using a solid ground plane, and placing decoupling capacitors close to the device. It's also recommended to use a 50-ohm transmission line impedance for the signal traces.
To ensure reliable operation of the MC100EP16TDTG in high-temperature environments, it's essential to follow proper thermal management practices, such as providing adequate heat sinking, using a thermally conductive PCB material, and keeping the device within its recommended operating temperature range.
The MC100EP16TDTG has built-in ESD protection, but it's still recommended to follow proper ESD handling procedures during assembly and testing, such as using an ESD wrist strap or mat, and storing the devices in anti-static packaging.
While the MC100EP16TDTG is designed for PECL (Positive Emitter-Coupled Logic) applications, it can be used in non-PECL applications with proper biasing and termination. However, this may require additional circuitry and design considerations to ensure reliable operation.
The recommended termination scheme for the MC100EP16TDTG involves using a 50-ohm termination resistor to VCC or VEE, depending on the application, to ensure proper signal integrity and reduce reflections.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MC100EP16TDTG Overview
Use the download button to access the MC100EP16TDTG schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MC100,
or try a keyword search, such as Line Driver or Receivers