The recommended operating voltage range for the MC24366 is 4.5V to 5.5V, with a typical voltage of 5V.
To ensure proper power-up and initialization, apply power to the VCC pin, then wait for the internal voltage regulator to stabilize (typically 10ms). After that, the device is ready for operation.
The MC24366 supports clock frequencies up to 16 MHz.
The RST pin should be pulled high during normal operation. During power-up, the RST pin should be pulled low for at least 10ms to ensure a proper reset. After the reset period, the RST pin can be released to allow normal operation.
The VREF pin is an internal voltage reference output. It should be connected to an external capacitor (typically 10nF) to filter out noise and ensure stable operation.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MC24366 Overview
Use the download button to access the MC24366 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MC243,
or try a keyword search, such as Terminals and Terminal Blocks
Suggested Parts
If you searched for MC24366, you might also be interested in these parts:
