Part Image

MC33262 - Multicomp Pro

Description: HEATSINK TO220/218 12.9C/W

Download MC33262 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
MC33262 - Multicomp Pro  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

MC33262 Details

  • Manufacturer Part Number:

    MC33262

  • Part Life Cycle Code:

    Active

  • ECCN Code:

    EAR99

  • HTS Code:

    8541.90.00.00

  • Manufacturer:

    SPC Multicomp

  • YTEOL:

    8

  • Body Material:

    ALUMINUM

  • Color:

    BLACK

  • Construction:

    EXTRUDED

  • Device Used On:

    TRANSISTOR

  • Fin Orientation:

    LONGITUDINAL

  • Finish:

    ANODIZED

  • Height:

    38.1 mm

  • Length:

    16.6 mm

  • Thermal Resistance:

    12.9 Ω

  • Thermal Support Device Type:

    HEAT SINK

  • Width:

    16.26 mm

MC33262 Frequently Asked Questions (FAQs)

  • A good PCB layout is crucial for the MC33262. Ensure a solid ground plane, keep the input and output traces short and separate, and use a common mode choke to reduce EMI. Refer to the application note AN1541 for more details.
  • Choose input capacitors with low ESR (Equivalent Series Resistance) and high ripple current rating. Output capacitors should have low ESR and be rated for the output voltage. A 10uF to 22uF ceramic capacitor is a good starting point for both input and output.
  • The MC33262 can operate up to 85°C ambient temperature, but it's recommended to derate the output current and voltage to ensure reliable operation. Consult the datasheet for thermal derating curves.
  • Use a voltage supervisor or a reset IC to monitor the input voltage and reset the device during undervoltage conditions. For overvoltage protection, consider using a voltage clamp or a TVS diode to limit the input voltage to the recommended maximum rating.
  • The recommended input voltage range is 3.5V to 18V, but the device can operate from 2.5V to 20V. However, the output voltage and current may be affected outside the recommended range.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

MC33262 Overview

Use the download button to access the MC33262 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MC332, or try a keyword search, such as Heat Sinks

Parts related to MC33262

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview