A good PCB layout for optimal thermal performance involves placing thermal vias under the IC, using a solid ground plane, and keeping the thermal path as short as possible. It's also recommended to use a thermal pad on the bottom of the IC and to connect it to a heat sink or a thermal plane.
To ensure reliable operation in high-temperature environments, it's essential to follow proper thermal design and layout guidelines, use a heat sink or thermal plane, and ensure good airflow around the device. Additionally, consider using a thermal interface material (TIM) between the IC and the heat sink to improve heat transfer.
The recommended input capacitor is a 10uF ceramic capacitor with a voltage rating of 25V or higher, placed as close as possible to the VIN pin. For the output, a 22uF ceramic capacitor with a voltage rating of 25V or higher is recommended, placed as close as possible to the VOUT pin.
The output voltage of the MCH3474-TL-H can be adjusted by using a resistive divider network between the VOUT pin and the ADJ pin. The output voltage is determined by the ratio of the resistors and the internal reference voltage (1.25V). A calculation tool or a voltage regulator design tool can be used to determine the required resistor values.
The maximum input voltage that can be applied to the MCH3474-TL-H is 28V. Exceeding this voltage may cause damage to the device or affect its reliability.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MCH3474-TL-H Overview
Use the download button to access the MCH3474-TL-H 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MCH34,
or try a keyword search, such as Small Signal Field-Effect Transistors
