ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
ROHM recommends derating the power dissipation according to the temperature derating curve in the datasheet. Additionally, ensure good thermal design, and consider using a heat sink or thermal interface material if necessary.
Although the datasheet specifies a maximum input voltage of 5V, ROHM recommends limiting the input voltage to 4.5V to ensure reliable operation and prevent damage to the internal ESD protection diodes.
While the MCR03EZPFX1582 is not specifically designed for high-frequency switching, it can be used up to 100 kHz. However, be aware of the increased power losses and potential for electromagnetic interference (EMI) at higher frequencies.
The POR and BOD features are designed to reset the device during power-up or brown-out conditions. Ensure that your system design can handle the reset signal and that the power supply is stable before the device is enabled.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
MCR03EZPFX1582 Overview
Use the download button to access the MCR03EZPFX1582 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MCR03,
or try a keyword search, such as Fixed Resistors
