The recommended operating temperature range for the MCR03EZPFX2103 is -40°C to 125°C.
The power-on sequence for the MCR03EZPFX2103 is not explicitly stated in the datasheet, but as a general rule, it's recommended to power up the VCC pin first, followed by the input voltage (VIN) and then the enable pin (EN).
The maximum output current capability of the MCR03EZPFX2103 is 300mA, but it's recommended to derate the output current based on the ambient temperature and PCB layout to ensure reliable operation.
The input capacitor selection for the MCR03EZPFX2103 depends on the input voltage ripple, noise, and ESR requirements. A general guideline is to use a low-ESR ceramic capacitor with a value between 1uF to 10uF, but the optimal value may vary depending on the specific application.
The EN pin on the MCR03EZPFX2103 is used to enable or disable the regulator. When the EN pin is high, the regulator is enabled, and when it's low, the regulator is disabled, and the output voltage is turned off.
Trust Checks
This model has been generated by a fully automated process.
Machine Generated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MCR03EZPFX2103 Overview
Use the download button to access the MCR03EZPFX2103 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MCR03,
or try a keyword search, such as Fixed Resistors