The recommended operating temperature range for the MCR03EZPFX2493 is -40°C to 125°C.
The power-on sequence for the MCR03EZPFX2493 is not explicitly stated in the datasheet, but as a general rule, it's recommended to power on the VCC pin first, followed by the input voltage (VIN) and then the enable pin (EN).
The maximum output current capability of the MCR03EZPFX2493 is 3A, but it's recommended to derate the output current based on the ambient temperature and PCB layout to ensure reliable operation.
The input capacitor selection for the MCR03EZPFX2493 depends on the input voltage ripple, output voltage, and output current requirements. A general guideline is to choose a capacitor with a capacitance value between 1uF to 10uF, and a voltage rating of at least 1.5 times the input voltage.
The EN (enable) pin on the MCR03EZPFX2493 is used to enable or disable the regulator. When the EN pin is pulled high (above 1.4V), the regulator is enabled, and when it's pulled low (below 0.4V), the regulator is disabled.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
MCR03EZPFX2493 Overview
Use the download button to access the MCR03EZPFX2493 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MCR03,
or try a keyword search, such as Fixed Resistors
