The recommended land pattern for the MCWR04X1102FTL is a rectangular pad with a size of 1.3mm x 0.8mm, with a non-solder mask defined (NSMD) pad shape. This ensures proper soldering and minimizes the risk of solder bridging.
The MCWR04X1102FTL is rated for operation up to 125°C, but it's recommended to derate the power handling at higher temperatures. Consult the manufacturer's guidelines for temperature derating and ensure proper thermal management in your design.
To ensure proper soldering, use a soldering iron with a temperature range of 220-250°C, and apply a small amount of solder paste to the pads. Use a reflow oven or a hot air gun to solder the component, and avoid applying excessive heat or pressure, which can damage the component.
The typical tolerance for the MCWR04X1102FTL's resistance value is ±1%. However, it's essential to check the specific tolerance for your batch or lot, as it may vary. Consult the manufacturer's documentation or contact their support team for more information.
The MCWR04X1102FTL is designed for general-purpose use and may not be suitable for high-frequency applications. If you need a high-frequency resistor, consider using a component specifically designed for that purpose, such as a thin-film resistor or a high-frequency chip resistor.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MCWR04X1102FTL Overview
Use the download button to access the MCWR04X1102FTL schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MCWR0,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
